Any Nationality
Sand Plaster
Look at the plans and specifications made by the architects and drafts people.
Advise clients on suitable products to use
Attach flashing around windows (reinforcing and weatherproofing joints)
Decide whether the surface will be covered using cement-based, sand-based or modified plaster
Prepare the surface for plastering
Mix the plaster
Apply plaster according to manufacturer's specifications Ensure the surface they cover is watertight
Create decorative textures in the finishing coats
Clean up after the job
At least 3/5 years of working experience as a Sand Plaster on offshore/on shore, industry, platforms & high-rise buildings.
Be able to communicate in English, Arabic, Hindi.
Know to read & work according to drawings.
Spray Painter
Sprays surfaces of machines, manufactured products, or working area with protective or decorative material, such as paint, enamel, glaze, gel-coat, or lacquer, using spray gun: Cleans grease and dirt from product, using materials, such as lacquer thinner, turpentine, soap, and water.
Applies masking tape over parts and areas that are not to be coated.
Fills cavities and dents with putty to attain smooth surface.
Selects and mixes coating liquid to produce desired color, according to specifications, using paddle or mechanical mixer.
Pours coating liquid into spray container and connects gun to airhose, using wrenches
Turns sprayer valves and nozzle to regulate width and pressure of spray according to knowledge of painting technique
At least 3/5 years of working experience as a Spray Painter on offshore/on shore ,industry platforms & high-rise buildings.
Be able to communicate in English, Arabic, Hindi
http://www.cctcuae.com
Email: admin@cctcauh.ae
Sand Plaster
Look at the plans and specifications made by the architects and drafts people.
Advise clients on suitable products to use
Attach flashing around windows (reinforcing and weatherproofing joints)
Decide whether the surface will be covered using cement-based, sand-based or modified plaster
Prepare the surface for plastering
Mix the plaster
Apply plaster according to manufacturer's specifications Ensure the surface they cover is watertight
Create decorative textures in the finishing coats
Clean up after the job
At least 3/5 years of working experience as a Sand Plaster on offshore/on shore, industry, platforms & high-rise buildings.
Be able to communicate in English, Arabic, Hindi.
Know to read & work according to drawings.
Spray Painter
Sprays surfaces of machines, manufactured products, or working area with protective or decorative material, such as paint, enamel, glaze, gel-coat, or lacquer, using spray gun: Cleans grease and dirt from product, using materials, such as lacquer thinner, turpentine, soap, and water.
Applies masking tape over parts and areas that are not to be coated.
Fills cavities and dents with putty to attain smooth surface.
Selects and mixes coating liquid to produce desired color, according to specifications, using paddle or mechanical mixer.
Pours coating liquid into spray container and connects gun to airhose, using wrenches
Turns sprayer valves and nozzle to regulate width and pressure of spray according to knowledge of painting technique
At least 3/5 years of working experience as a Spray Painter on offshore/on shore ,industry platforms & high-rise buildings.
Be able to communicate in English, Arabic, Hindi
http://www.cctcuae.com
Email: admin@cctcauh.ae
Post a Comment