JOB SKILLS JOB DESCRIPTIONS
POSITION REQUIREMENTS/EXPERIENCE
Safety Trainer
* Minimum BSc in Industrial Safety relevant to engineering discipline from a recognized institute or university. Possess safety professional certification such as OSHA, NEBOSH Certificate or NSC Advanced Certificate Ten (6) years' experience in delivering industrial safety training and facilitating workshop is preferred. Hands-on experience in industrial safety management and oil / gas plants operation and/or petrochemical industry would be beneficial. Expertise in process hazard analysis, Emergency, response program, risk communication, risk assessment, qualitative / quantitative & Hazard communication.
HVAC Trainer
* A BSc Mechanical Engineer with minimum of 4 years or High School with 11 years, in the field of HVAC servicing and maintenance.
* Experience in preventive maintenance (PM) of heating, ventilating and air-conditioning systems (HVAC, air-handling units, boilers, cooling towers, circulation pumps and control systems, HVAC Direct digital Controls (DDC) and building management systems (BMS).
DIP Trainer
* Associate Degree in Industrial/Safety/Vocational Education plus 4 years' experience or High School with 11 years related experience
* Instructs trainees on Driving behaviors and techniques
* 4-6 year experience in delivering industrial training and facilitating workshops is preferred.
* International Certification in the relevant training is preferred.
* Driving in the desert experience (Off-Road) experience is preferred
HEOP Trainer
* Minimum High School with 11 years hands-on work experience heavy equipment operations.
* Possess working knowledge of American Society Mechanical Engineers 30. 2, .3, .4, & .5 and American Petroleum Institute -2C & 2D
* Must have Tower, Crawler, pedestal and mobile crane experience.
* Operate 200 ton and above cranes
* Able to read and explain the load chart, radius diagram.
* Crane rigger experience with the ability to understand and explain the lifting plan.
* Familiar on operating the earth moving equipment
* Experience in operating a Forklift.
2X Truck Trainer
* Minimum High School with 11 year experience in Oil & Gas mobile truck operations with preferred hands-on skills with refuler, suction, tanker, small ladder, manlift and diesel trucks
* Must possess wide experience in driving heavy trucks and basic mechanics as well as Safe and defensive Driving Training experience.
* Experienced in Off-Road Training
Operator Trainer
* Minimum High School with 11 years' experience as a qualified Supervising or Control board Operator for the Oil & Gas/ Petrochemical industry or BSc with minimum 4 years' experience).
* Experienced in One or more of the following Processes: Distillation/fractionation, reactor/catalytic, cryogenic, hydro treating, GOSP, WIP, utilities or tank farm operations. DCS experience Preferred.
Instrument Technician Trainer
[PCST] * Minimum High School with 11 years' experience in Pneumatic, Electronic and Digital Instrumentation in Oil/Gas Industry or BSc with minimum 4 years' experience).
* Experience should include PM of Field Devices (DVCs, Smart Transmitters, conventional Transmitters, Valves, Controllers and FF devices).
* Troubleshooting Process Control Systems.
* Knowledge and experience on DCS (Yokogawa Centum, HoneywellTDC300, DeltaV) and PLC (Tricon, Siemens, AB) is an advantage.
Electrical Trainer
* BS Degree in Electrical Engineering with 6 Years' experience as Maintenance Engineer or High School with 11 years' experience as technician in Class 1, Division 1, Oil & Gas Petrochemical Plants, with hands-on skills in maintenance and installation of electrical equipment and distribution system. Medium and high voltage substation experience required.
* Familiar with electrical industry codes, Arc Flash and shock hazards, work permit and lockout procedures
* Able to troubleshoot and repair AC machines , and UPS systems and Motor operated valves , using electrical/ electronic, test equipment, schematics and one line diagrams.
* Experience in the repair of HV power transformers, ESD, battery monitoring and charging system.
* Able to interpret logic diagrams & ladder diagrams.
* Basic operation / programming of PLC.
Mechanical Trainer
* 4 years' experience as degreed Mechanical Engineer or High School with 11 years field experience as a mechanical maintenance technician in oil and gas or petrochemical industries.
* Experience in disassembly, inspection and repair of valves, pumps, gearboxes, and compressors. Experience in operating lathe machines is preferred.
* Knowledge and experience in the following mechanical subjects: Bearings and Lubrication, LASER alignment, Vibration analysis, motor operated valve actuators, Mechanical seals, and Turbines.
Welding Trainer
* Minimum High School with 11 Years' experience as a welder working in oil & gas/petrochemical industry Candidate should have served minimum 3 years apprenticeship or approved CITB training
* Candidate should have hands on experience of SMAW method, welding of structural steelwork and Pipe welding of carbon steel, using both E-6010 and E-7018 electrodes for open root, fill, and cap, plate sizes up to ¾ inch thickness and pipe sizes from 1 inch up to 8 inch schedule 40 - schedule 140 pipe or BSc with minimum 6 years' experience).
* Candidate should have hands on experience in GTAW of Stainless steel, Carbon Steel and low alloy pipe welding of small bore pipe 1 inch to 2 ½ inch diameter
* Candidates should have been certified to 100% Radiographic standards in accordance with any of the following: AWS, ASME/ANSI, API, BS, ASTM Codes and standards for welding certification.
Pipefitter / fabricator Trainer
* 11 Years' experience as a pipefitter fabricator in the oil & gas/petrochemical industry, Must read fabrication drawings isometric & orthographic projections, able to develop material lists and fabrication templates for the projects or BSc with minimum 6 years' experience).
* Plans work assignments to determine materials, equipment, and tools requirements to determine materials, equipment, and tools requirements in fabricating threaded, welded and non-metallic pipe spool fabrication.
* Cut, threads, bends joints, and assembles pipe for fitting and fabrication (Ferrous/Non Ferrous/Non-Metallic).
* Cut, prepares, bends, and drills plate for fabrication.
* Perform Hydrostatic testing of pipe spools. Knowledge of rigging equipment and procedures helpful.
Metal Fabricator
* Minimum High School with 11 Years' experience as a metal fabricator in the oil & gas/petrochemical industry or BSc with minimum 6 years' experience
* Must read fabrication drawings isometric & orthographic projections, able to develop material lists and fabrication templates for the projects or BSc with minimum 6 years' experience).
* Must be able to cut, prepares, bends, and drills plate for fabrication
Surveying Trainer
* Minimum High School with 11 Years' experience or a Civil Engineer or preferably a Geodetic Engineer holding a Professional Practice Certificate or License. He must have a minimum of 4 years of work experience covering different classes of surveys such as but not limited to Preliminary Surveys, Lay-out Surveys and Control Surveys.
* Must possess wide experience in both basic and advanced aspects of surveying practice.
* He must also be proficient in handling both basic and advanced surveying instruments
Job Location: - Saudi Arabia
Job Opening:- Trainer
This would be a one year of renewable contract with single status
Also this is a residential Position-where there is no rotation and working pattern would be 5 day working 2 days off and 30 working days leave is granted in a years
If shortlisted you would be invited to F2F round of Interview in Mumbai.
Interview days
7th Sep to 8th-Sep and 10th-Sep to 12th-Sep 2014
Interview Location
Mumbai
No reimbursement of travelling cost would be provided
IF YOU ARE INTERESTED THEN FORWARD YOUR RESUME ALONG WITH FOLLWING DETAILS (ABSOLUTELY NECESSARY):
Details Answers by Applicant
Candidate Name:
Passport no:-
Nationality :
Date of Birth:- ( In DD/ MM/ YYYY)
Total years of work Experience:-
Highest educational qualification-Degree or Diploma in what discipline
Total years of Teaching exp.:
Full Time Teaching (Y/N):
Field Experience (Y/ N)-If Yes What Craft/discipline
Do you hold any Certification in Training
Current Company/Employer:-
Current Work Location:
Current Basic salary in USD / Month :-
Expected Basic salary USD / Month :-
Best Available Contact Details (Please provide at least 3 contact numbers )
Best email address:-
Notice
Kindly share your updated CV with all detailed information on projects worked on till date, team handling details, offshore exp... on my mail id : deepali@sofomation.com
POSITION REQUIREMENTS/EXPERIENCE
Safety Trainer
* Minimum BSc in Industrial Safety relevant to engineering discipline from a recognized institute or university. Possess safety professional certification such as OSHA, NEBOSH Certificate or NSC Advanced Certificate Ten (6) years' experience in delivering industrial safety training and facilitating workshop is preferred. Hands-on experience in industrial safety management and oil / gas plants operation and/or petrochemical industry would be beneficial. Expertise in process hazard analysis, Emergency, response program, risk communication, risk assessment, qualitative / quantitative & Hazard communication.
HVAC Trainer
* A BSc Mechanical Engineer with minimum of 4 years or High School with 11 years, in the field of HVAC servicing and maintenance.
* Experience in preventive maintenance (PM) of heating, ventilating and air-conditioning systems (HVAC, air-handling units, boilers, cooling towers, circulation pumps and control systems, HVAC Direct digital Controls (DDC) and building management systems (BMS).
DIP Trainer
* Associate Degree in Industrial/Safety/Vocational Education plus 4 years' experience or High School with 11 years related experience
* Instructs trainees on Driving behaviors and techniques
* 4-6 year experience in delivering industrial training and facilitating workshops is preferred.
* International Certification in the relevant training is preferred.
* Driving in the desert experience (Off-Road) experience is preferred
HEOP Trainer
* Minimum High School with 11 years hands-on work experience heavy equipment operations.
* Possess working knowledge of American Society Mechanical Engineers 30. 2, .3, .4, & .5 and American Petroleum Institute -2C & 2D
* Must have Tower, Crawler, pedestal and mobile crane experience.
* Operate 200 ton and above cranes
* Able to read and explain the load chart, radius diagram.
* Crane rigger experience with the ability to understand and explain the lifting plan.
* Familiar on operating the earth moving equipment
* Experience in operating a Forklift.
2X Truck Trainer
* Minimum High School with 11 year experience in Oil & Gas mobile truck operations with preferred hands-on skills with refuler, suction, tanker, small ladder, manlift and diesel trucks
* Must possess wide experience in driving heavy trucks and basic mechanics as well as Safe and defensive Driving Training experience.
* Experienced in Off-Road Training
Operator Trainer
* Minimum High School with 11 years' experience as a qualified Supervising or Control board Operator for the Oil & Gas/ Petrochemical industry or BSc with minimum 4 years' experience).
* Experienced in One or more of the following Processes: Distillation/fractionation, reactor/catalytic, cryogenic, hydro treating, GOSP, WIP, utilities or tank farm operations. DCS experience Preferred.
Instrument Technician Trainer
[PCST] * Minimum High School with 11 years' experience in Pneumatic, Electronic and Digital Instrumentation in Oil/Gas Industry or BSc with minimum 4 years' experience).
* Experience should include PM of Field Devices (DVCs, Smart Transmitters, conventional Transmitters, Valves, Controllers and FF devices).
* Troubleshooting Process Control Systems.
* Knowledge and experience on DCS (Yokogawa Centum, HoneywellTDC300, DeltaV) and PLC (Tricon, Siemens, AB) is an advantage.
Electrical Trainer
* BS Degree in Electrical Engineering with 6 Years' experience as Maintenance Engineer or High School with 11 years' experience as technician in Class 1, Division 1, Oil & Gas Petrochemical Plants, with hands-on skills in maintenance and installation of electrical equipment and distribution system. Medium and high voltage substation experience required.
* Familiar with electrical industry codes, Arc Flash and shock hazards, work permit and lockout procedures
* Able to troubleshoot and repair AC machines , and UPS systems and Motor operated valves , using electrical/ electronic, test equipment, schematics and one line diagrams.
* Experience in the repair of HV power transformers, ESD, battery monitoring and charging system.
* Able to interpret logic diagrams & ladder diagrams.
* Basic operation / programming of PLC.
Mechanical Trainer
* 4 years' experience as degreed Mechanical Engineer or High School with 11 years field experience as a mechanical maintenance technician in oil and gas or petrochemical industries.
* Experience in disassembly, inspection and repair of valves, pumps, gearboxes, and compressors. Experience in operating lathe machines is preferred.
* Knowledge and experience in the following mechanical subjects: Bearings and Lubrication, LASER alignment, Vibration analysis, motor operated valve actuators, Mechanical seals, and Turbines.
Welding Trainer
* Minimum High School with 11 Years' experience as a welder working in oil & gas/petrochemical industry Candidate should have served minimum 3 years apprenticeship or approved CITB training
* Candidate should have hands on experience of SMAW method, welding of structural steelwork and Pipe welding of carbon steel, using both E-6010 and E-7018 electrodes for open root, fill, and cap, plate sizes up to ¾ inch thickness and pipe sizes from 1 inch up to 8 inch schedule 40 - schedule 140 pipe or BSc with minimum 6 years' experience).
* Candidate should have hands on experience in GTAW of Stainless steel, Carbon Steel and low alloy pipe welding of small bore pipe 1 inch to 2 ½ inch diameter
* Candidates should have been certified to 100% Radiographic standards in accordance with any of the following: AWS, ASME/ANSI, API, BS, ASTM Codes and standards for welding certification.
Pipefitter / fabricator Trainer
* 11 Years' experience as a pipefitter fabricator in the oil & gas/petrochemical industry, Must read fabrication drawings isometric & orthographic projections, able to develop material lists and fabrication templates for the projects or BSc with minimum 6 years' experience).
* Plans work assignments to determine materials, equipment, and tools requirements to determine materials, equipment, and tools requirements in fabricating threaded, welded and non-metallic pipe spool fabrication.
* Cut, threads, bends joints, and assembles pipe for fitting and fabrication (Ferrous/Non Ferrous/Non-Metallic).
* Cut, prepares, bends, and drills plate for fabrication.
* Perform Hydrostatic testing of pipe spools. Knowledge of rigging equipment and procedures helpful.
Metal Fabricator
* Minimum High School with 11 Years' experience as a metal fabricator in the oil & gas/petrochemical industry or BSc with minimum 6 years' experience
* Must read fabrication drawings isometric & orthographic projections, able to develop material lists and fabrication templates for the projects or BSc with minimum 6 years' experience).
* Must be able to cut, prepares, bends, and drills plate for fabrication
Surveying Trainer
* Minimum High School with 11 Years' experience or a Civil Engineer or preferably a Geodetic Engineer holding a Professional Practice Certificate or License. He must have a minimum of 4 years of work experience covering different classes of surveys such as but not limited to Preliminary Surveys, Lay-out Surveys and Control Surveys.
* Must possess wide experience in both basic and advanced aspects of surveying practice.
* He must also be proficient in handling both basic and advanced surveying instruments
Job Location: - Saudi Arabia
Job Opening:- Trainer
This would be a one year of renewable contract with single status
Also this is a residential Position-where there is no rotation and working pattern would be 5 day working 2 days off and 30 working days leave is granted in a years
If shortlisted you would be invited to F2F round of Interview in Mumbai.
Interview days
7th Sep to 8th-Sep and 10th-Sep to 12th-Sep 2014
Interview Location
Mumbai
No reimbursement of travelling cost would be provided
IF YOU ARE INTERESTED THEN FORWARD YOUR RESUME ALONG WITH FOLLWING DETAILS (ABSOLUTELY NECESSARY):
Details Answers by Applicant
Candidate Name:
Passport no:-
Nationality :
Date of Birth:- ( In DD/ MM/ YYYY)
Total years of work Experience:-
Highest educational qualification-Degree or Diploma in what discipline
Total years of Teaching exp.:
Full Time Teaching (Y/N):
Field Experience (Y/ N)-If Yes What Craft/discipline
Do you hold any Certification in Training
Current Company/Employer:-
Current Work Location:
Current Basic salary in USD / Month :-
Expected Basic salary USD / Month :-
Best Available Contact Details (Please provide at least 3 contact numbers )
Best email address:-
Notice
Kindly share your updated CV with all detailed information on projects worked on till date, team handling details, offshore exp... on my mail id : deepali@sofomation.com
No comments:
Post a Comment
Please give your feedback or Job Request here