Multiple Vacancies in The KCP Limited, Vietnam

The KCP Limited is a leading, dynamic, industrial house in South India, with businesses spanning over diverse products and diverse locations. Cement, Heavy Engineering, Hospitality and Sugar are its core areas of business.

Position : Executive Sous Chef 

Position : Demi Chef De Partie

Position : DCDP (Pastry)

Duties and Responsibilities-

To assist the head chef during service for timing and progress of all dishes.
To assist the Chef de Partie in the overall checking and maintaining of your station and to assume overall responsibility in the Chef de Parties absence.
Prepare Sushi, Maki Rolls, Nigiri, salads, fish, meats dishes and prepare as per the recipe standard.
Prepare mis-se-place like cutting of fish, meat, vegetables, sauce and garnish.
Follow First in First Out (FIFO)
Maintain proper log book and proper temperature of food items.

For above positions candidates must be have min 3 - 7 years experience 

Project Head / Manager - Mechanical

Candidate should possess a B.E./M.E in Mechanical Engineering 

15 to 20 years experience preferably in sugar industry

Process Head / Manager
Candidate with a UG/PG degree in Science from any recognized university 
15 to 20 years experience in sugar industry.
Senior Mechanical Engineer / Assistant Mechanical Manager
Candidate should be a B.E(Mechanical / Diploma in Mechanical 
8 to 12 years experience in autocad,drawings,coordination in project planning in sugar industry
Assistant Manager / Deputy Manager - Cane Development
Candidate should have a B.Sc. / M.Sc degree in Agriculture 
10 to 15 years hands on experience in cane development in sugar industry. 
Preferred age of the candidate is around 45 years.
Civil Engineer / Asst. Manager - Civil
Candidate should have a diploma or a degree in Civil 
10 to 15 years experience in estimation & supervision of projects in sugar Industry. 
Preferred age of the candidate is around 40 years.
Senior Agricultural Officer - Cane Development
Candidate should have a B.Sc. / M.Sc degree in Agriculture 
8 to 12 years hands on experience in Cane Development in Sugar Industry. 
Preferred age of the candidate is around 35 years.
Recruiter Name:Mr. Shailender
Company:The KCP Limited
Email Address:careers@kcp.co.in
Website:http://www.kcp.co.in/KCP/home.htm

Multiple Vacancies in TCB Cert. Worldwide LLC, Kuwait

HR (Manpower Recruiter)

-To recruit manpower
-Planning, scheduling of manpower
-Conduct interviews


5+ years experience

Construction Manager

Specifying project objectives and plans including delineations of scope, budgeting, scheduling, setting performance requirements and selecting project participants.
Maximizing resource efficiency through procurement of labour, materials and equipment
Implementing of various operations through proper coordination and control of planning, design, estimating, contracting and construction in the entire process.
Developing effective communications and mechanism for resolving conflicts.
Responsible for leading team member of engineers.
Responsible for supervising every step of project and make sure that all the terms and conditions are followed.
Is responsible to do the work per environmental standards and make sure for the safety points are considered as per rules and regulations
Is responsible for checking the training level of each employee and make sure that they can work on respective project. 

Qualification: Must be Bachelor Degree (Mechanical) with minimum 12 years experience in Oil & Gas sector.
Must have Gulf Experience
Must have supervisory capability to direct the EPC Projects facility.
Must can make quick, sound decisions.
Organize implementation of various safety recommendations for Safety, Health & Environment of his employees working under the Contract.

Contract Manager

Participates in planning of company contracting process, publishing tenders and coordinating with other departments regarding tenders and contracts. 
Prepare contract documents, review contract clauses to ensure Owners rights in achieving best services according company rules and regulations at minimum cost. 
Receive bids, evaluate offers from commercial and technical point of view as required from time to time and ensure compliance with legal requirements. Study and review user recommendations on the results of bid evaluation. 
Participate in pre-tender meeting and answer contractors questions. 
prepare any variation order if required 
Contact the successful bidder for preparation of final contract document for signature, ensure submission of performance bonds as per company requirements and other insurance requirements. 
Follow up proper execution of the contracts including site visits when necessary. 
Follow up and update contractor and vendor list and keep records of the same. 
Prepare contracts statistics and periodical progress reports of contracts team activities. 
Works as per established procedure and technical standards. 
Help in the preparation of budget estimates for the company's annual contracts, and collects data and information needed for that. 
Connection with departments concerned to identify the specifications, quantities and quality of services, materials and equipment to be contracted to consider that in the stages of contracting and tendering. 
The memoranda of the tender and qualification requirements and the call for tenders for companies and institutions and to enable them to progress the company offers for tenders. 
Participate in the evaluation of proposals and review the documents and tender documents and ensure compliance with the requirements and regulations 
Involved in negotiating with suppliers and contractors about the breach of the terms of their tenders or contracts and work to find appropriate solutions to ensure the rights of the company. 
Participate in the work of research into contracts to learn about the new international formulation and specification of the public or private. 
Renew the records of contractors and suppliers and the preparation of statistics and annual contracts and periodic reports on the progress of work in the Section. 
Preparation of Contracts Status report. 

Qualification: Must be B.E with 8-10 years of related experience in similar capacity.
Must have Gulf Experience 
Proficiency in spoken and written English 
Proficiency in computer and in computer applications like MS Project & MS office Tools and Planning Applications. 
Knowledge in written and spoken Arabic will be added advantage
Sr. Planning Engineer
Review and screen each job for redundancy, necessity, completeness and accuracy 
Assess all the jobs in the field to confirm scope and nature of the work. 
Identify & plan all resources required to execute the EPC Project such as materials, equipment & outsourcing 
Plan / Request direct material required for each EPC Project
Develop a year ahead forecast schedule for the PMs related to the area and update quarterly. 
Attend daily meeting with Project Manager and Field engineer to discuss each next day schedule and report the meeting outcomes. 
Call for the weekly meeting with Project manager and field engineer to discuss each next week schedule and report the meeting outcomes. 
Develop monthly, weekly & daily work schedules with best work plans & optimum resource utilization in the areas. 
Collect work accomplishment each day and produce schedules for the next day 
Remains flexible to meet changes in scheduled jobs due to any urgent work anytime. 
To be able to plan shut down forced or planned, including preparation of time schedules, equipment list, materials, tools and required manpower. 
To be able to prepare the Technical Reports, update & provide feedback on planning activities as and when required by company 
Able to execute tasks as advised by company such as special assignment committee participation etc. on behalf of Planning team. 
Able to controls, schedule and supervises planning activities for more than one area. 
Ability to lead planning group, manage their activities and performance. 

Qualification: Must be Bachelors degree in Mechanical with minimum 12 years experience in Oil & Gas Sector.
Must have Gulf Experience
Have experience in using MS Project or Primavera and other related computer applications
Have knowledge of safety requirements, and practiced safety refinery or petrochemical plants. 
Good knowledge of English language 
Able to read technical drawings, manuals, Scope of works etc. 
Have managerial skills, knowledge of general engineering techniques.
Planning Engineer
Involve with planning, controlling, monitoring, managing and directing the assigned Contract resources to best meet Contract objectives.
Control and monitor Contract scope, time, cost and quality in managing Contract requirements.
Preparation of Program of work based on WBS.
Collect work accomplishment each day and produce schedules for the next day.
Coordinate with Project Manager to build realistic schedules
To be able to plan shut down forced or planned, including preparation of time schedules, equipment list, materials, tools and required manpower.
Identifying the best series of events in the correct order for the Contract to finish on time and on budget.
Developing detailed samples to understand schedules and graphs.
Producing visual aids to explain the schedule of work, including bar charts and network diagrams.
Monitoring the progress of the contract at different stages of its development.
Preparation of Quantity measurement forms and invoicing.
Preparation of Cash flow and projects monitoring and update.
Understanding of client requirements and expectations.
Continuous development of improved and efficient methods of working.
Determine critical path activities for work areas and work disciplines and monitor schedule deviations and proposes corrective action.
Manage and administer all active subcontracts ensuring compliancy with the subcontract terms and agreements.
Liaise and manage correspondence between the Contract and subcontractors.
Coordinate the mobilization and logistics of the subcontractors on an as needed basis.
Attend and contribute information during team meetings with regards to current/outstanding issues and or weekly process.

Qualification: Must be Bachelor Degree (Mechanical) with minimum 8 years experience in Oil & Gas sector.
Must have Gulf Experience
Have knowledge of Safety requirements 
Good knowledge of English language.
Have experience in using MS Project or Primavera and other related computer application
Civil Engineer
Involve with planning, controlling, monitoring, managing and directing the assigned Contract resources to best meet Contract objectives.
Control and monitor Contract scope, time, cost and quality in managing Contract requirements.
Preparation of Program of work based on WBS.
Collect work accomplishment each day and produce schedules for the next day.
Coordinate with Project Manager to build realistic schedules
To be able to plan shut down forced or planned, including preparation of time schedules, equipment list, materials, tools and required manpower.
Identifying the best series of events in the correct order for the Contract to finish on time and on budget.
Developing detailed samples to understand schedules and graphs.
Producing visual aids to explain the schedule of work, including bar charts and network diagrams.
Monitoring the progress of the contract at different stages of its development.
Preparation of Quantity measurement forms and invoicing.
Preparation of Cash flow and projects monitoring and update.
Understanding of client requirements and expectations.
Continuous development of improved and efficient methods of working.
Determine critical path activities for work areas and work disciplines and monitor schedule deviations and proposes corrective action.
Manage and administer all active subcontracts ensuring compliancy with the subcontract terms and agreements.
Liaise and manage correspondence between the Contract and subcontractors.
Coordinate the mobilization and logistics of the subcontractors on an as needed basis.
Attend and contribute information during team meetings with regards to current/outstanding issues and or weekly process.

Qualification: Must be Bachelor Degree (Mechanical) with minimum 8 years experience in Oil & Gas sector.
Must have Gulf Experience
Have knowledge of Safety requirements 
Good knowledge of English language.
Have experience in using MS Project or Primavera and other related computer application
Electrical Engineer
Coordinate work functions of the EPC Project in his area of responsibility. Ensure quality of work and supervision.
Ensure the implementation of corrective/Preventive/Shutdown activities to meet the Project goal.
Ensure personnels adherence to safe working.
Provide technical expertise and improvements to the operational functions.
Ensure at all times the availability of personnel, tools and test equipments.
Ability to supervise group of people from different technical backgrounds
Do resource forecasting for the timely completion of given work.
Ensure projects are completed per project plans.
Daily operations of field work activities and organization of subcontractors.
Regular contracts status reports.
Communicate with subcontractors, ensuring that projects are completed on time
Frequently visit the construction site to monitor the progress and catch any problems that may occur.

Qualification: Must be Bachelor Degree (Mech/Civil/Ele/Inst) with minimum 8 years experience in Oil & Gas Sector.
Must have Gulf Experience
Must have supervisory capability to direct the EPC of the complete facility.
Must can make quick, sound decisions.
Basic understanding of Program scheduling techniques.
Inspects job sites to ensure specified procedures, standards, Fire & Safety Regulations are followed.
Instrument Engineer
Coordinate work functions of the EPC Project in his area of responsibility. Ensure quality of work and supervision.
Ensure the implementation of corrective/Preventive/Shutdown activities to meet the Project goal.
Ensure personnels adherence to safe working.
Provide technical expertise and improvements to the operational functions.
Ensure at all times the availability of personnel, tools and test equipments.
Ability to supervise group of people from different technical backgrounds
Do resource forecasting for the timely completion of given work.
Ensure projects are completed per project plans.
Daily operations of field work activities and organization of subcontractors.
Regular contracts status reports.
Communicate with subcontractors, ensuring that projects are completed on time
Frequently visit the construction site to monitor the progress and catch any problems that may occur.

Qualification: Must be Bachelor Degree (Mech/Civil/Ele/Inst) with minimum 8 years experience in Oil & Gas Sector.
Must have Gulf Experience
Must have supervisory capability to direct the EPC of the complete facility.
Must can make quick, sound decisions.
Basic understanding of Program scheduling techniques.
Inspects job sites to ensure specified procedures, standards, Fire & Safety Regulations are followed.
Estimation Engineer - Mechanical
Estimation Engineer - Civil
Estimation Engineer - Electrical
Estimation Engineer - Instrumentation
Review of Instruction to Bidders (ITB)
Preparation of pre-bid queries
Mid tendering meeting with client
Site visit during tender stage
Site survey during site visit for establishing the temporary facilities, Fabrication yard, lay down, crane access, etc.
Preparation of site visit report
Discussion with management on site visit 
Plot plan and P & ID study
Preparation of BOQ from FEED Documents.
Co-ordination with Project, Sales and Procurement department 
Floating enquiries to subcontractor and vendors
Follow up-of offers from various subcontractors for all disciplines
Preparation of comparison sheet for various contractor 
Preparation of Construction Schedule
Preparation Heavy lift plan for critical equipments
Preparation of manning chart based on quantities
Construction execution plan for various activities
Preparation of Direct and Indirect cost
Submission of cost to sales department
Must have Gulf Experience
8+ years experience
Lead Engineer (Mechanical)
Preliminary and detailed engineering of new Mechanical related jobs and modification of existing facilities which includes Engineering design, preparation of drawings, bill of materials, estimation and costing, preparation of contracts for execution of jobs, selection of contractors, procurement of materials if required, coordination with contractors during execution and follow up the job to complete as per the owners requirements. Monitoring of field activities to ensure the quality and material compatibility and conformity. 
Provides technical expertise and improvements for rotating and non-rotating mechanical equipment, i.e., pumps, compressors, valves, piping and pressure vessels in respective fields 
Provides plant with latest mechanical engineering technology required to support mechanical equipment under the jurisdiction of maintenance and production management. 
Reviews and prepares diagrams, charts, drawings, calculations, and reports for defining equipment problems and makes recommendations for improvements. 
Develops engineering advice for solutions to equipment problems. 
Assists the rotating and non-rotating mechanical equipment specialists in the analysis and solutions to mechanical equipment problems. 
Develops equipment improvement ideas and issues reports and makes recommendations for improvement. 
Leads study and investigation teams when analysing and recommending improvements. 
Have basics knowledge in Inspection, Vibration Analysis, Balancing and Lubrication. 
Preparation of technical plans and schedules and operational projects and the important follow up their implementation and ensures conformity of the implementation of the plans, specifications and propose solutions to the deviations. 
Prepare and review designs and specifications for tenders and the preparation of mechanical work related documents, and participate in the analysis of bids and tenders. 
Preparation of technical evaluation of existing and new equipment as part of the graphics and its technical specifications and provide the necessary reports on the results of this assessment. 
Implementation of the engineering studies for improving and developing methods of operation and maintenance of equipment and raises their efficiency and provides economic and technical evaluation of the proposed development works. 
Systems and follows the rules and instructions of safety and health, the environment and make the necessary arrangements to protect himself and others while maintaining the company's assets and property. 

Qualification: Must Engineering Degree with 10 years experience in similar field or Diploma in Mechanical Engineering with 15 years experience in similar field. 
5 years (Minimum) Experience in Major EPC projects in relevant fields.
Must have Gulf Experience 
Familiar with relevant design software packages. 
Proficiency in English (spoken, written and reading). 
Basic computer and computer application knowledge.
Material Controller
Materials stock control management. 
Participate in preparation of material requisition including technical and inspection requirement for different category of materials required in EPC Project. 
Familiarity with different grades of materials used in EPC Project and knowledge about American, British, European standards. 
Inspection quality & specifications of all materials like mechanical, Civil, electrical, instrumentation. 
Familiarity with NDT and other test procedures for materials. 
Participate, purchasing and evaluation procedures of bids from vendors and assist in selection of suitable vendor for supply of required materials. 
Assist in selection of materials as per Specifications and standards. 
Works per the established procedure and specialized technical standards. 

Qualification: Must be B.E (Mechanical) with minimum 5 years in EPC Project and 5 years in material stock control & procurement in oil & gas Industry field. 
Must have Gulf Experience.
Proficiency in spoken and written English 
Well familiar in use of various computer tools and software for preparing reports and presentation materials.
Safety Engineer
Qualified to conduct safety risk assessment whether in process of JRA, BBS and Safety audit and he must report all the result of performance as well as the corrective action for review, initiation and action.
Conduct the safety training for all contractor personnel and he shall ensure all the work is covering under International Safety measurement codes and standards.
Have good knowledge of engineering drawings for quick information that support of safety requirements.
He shall ensure the ground rules for Material Safety Data Sheets (MSDS) to its prohibition and application requirements.
Ensure that the requirements and recommendations of all Company HSE rules/regulations & regulatory bodies are followed.
Identify and appraise potential HSE hazards and take proactive and preventive actions.
Ensure that every employee is trained to perform their jobs in a productive and safe way.
Conduct and represent HSE safety meetings & HSE presentations for various purpose to the management
Preparation of safety performance reports & issues.
Support and evaluate the emergency and evacuation plan with recommendations follow-up
Perform a continuous check to ensure that proper housekeeping is maintained in all areas.
Anticipate, identify and evaluate hazardous conditions and practices.
Ensure compliance, conservation and protection of the environment
Conduct and document thorough accident, incident and near-miss investigations and provide recommendations for process, procedure or equipment changes to eliminate future occurrences.
Evaluate safety rewards and recognition program for potential improvement
Inspect job sites to ensure specified procedures, standards, Fire and Safety regulations are followed.

Qualification: Must be Engineering Graduate and Diploma in Industrial Safety with minimum 10 years experienced in Oil and Gas sectors.
Must have Gulf Experience
Painting Supervisor
Supervises and coordinates activities of workers engaged in applying decorative and protective coats of paint, varnish, stain, enamel or lacquer to exterior or interior surfaces, trimming and fixtures of buildings or other structures.
Assist workers in mixing and blending paint, removing old paint from surfaces, repairing and cleaning surfaces and applying coatings to surfaces.
Supervises and coordinates activities of workers engaged in applying insulating material to exposed surfaces of equipment, such as boiler, tanks, air ducts or pipes.
Estimates and requisitions necessary materials and supplies
Demonstrates to new workers techniques of cutting and applying insulation
Inspects applied insulation for conformance to specifications.
Provide work instructions to assigned crews providing detailed technical and work instructions
Prepare material tools, safety precautions for assigned jobs.
Ensures quality performance of all assigned work.
Prepare and deliver reports that summarize work activity

Basic qualification: Must be Diploma in Mechanical with minimum 8 years experience in Oil & Gas sector.
Must have Gulf Experience 
Basic computer application knowledge.
Proficiency in English (Spoken, written & reading)
Mechanical Supervisor
Coordinate with Engineer on all work being performed in the area
Supervises EPC project activities i.e. rotating, static, piping, vessels, etc.
Supervise the execution of the work to ensure quality and consistency
Review work permits
Conduct daily safety meeting with work crews.
Work in close coordination with planner on all emergency and urgent works
Provide work instructions to assigned crews providing detailed technical and work instructions
Prepare material tools, safety precautions for assigned jobs.
Ensures quality performance of all assigned work

Qualification: Must be Diploma in Mechanical with minimum 8 years experience in Oil & Gas project.
Must have Gulf Experience 
Computer literacy and proficiency in English (Spoken, written & reading)
Ability to read drawings, capability to supervise personnel under his control and coordinate work accordingly
Civil Supervisor
Directs and supervise EPC activities in assigned area.
Ensure that safe working practices and regulations are followed on site.
Assist in maintaining equipment records.
Provide technical help and support to technicians when needed
Mark ground lay out and checks level and dimensions.
Perform civil work like refractory work, fire proofing works, etc.
Carry and responsible for the field survey.
Check and record measurements of work executed while in process.
Transfers detailed instructions from the Engineer to the assigned work crew.
Provide work instructions to assigned crews providing detailed technical and work instructions
Ensures quality performance of all assigned work
Assist in maintaining Daily Activities Log book.

Must Diploma in Civil with minimum 8 years experience in Oil & Gas Sector
Must have Gulf Experience 
Ability to read drawings, capability to supervise personnel under his control and coordinate work accordingly.
Basic computer application knowledge
Proficiency in English (Spoken, Written & reading).
M S Ray

jobs@jobsandmore.org

Interview for Multiple Vacancies in Kuwait

Planning Engineer (maximo) 


8 to 10 years experience in Oil/Gas related maintenance works. Out of which 5 years of planning work experience is desired on an Engineer/supervisory level.
Broad knowledge about Engineering disciplines, 
Very good knowledge & hands on experience in Maximo CMMS software
Good knowledge of PC planning software in general & MS-Project in particular.
Very good knowledge of English language

INDUSTRY: OIL & GAS Refinery (Other industry experience not applicable )


Education: Bachelor degree in Mechanical Engineering.
(4 YEARS FULL TIME)


Gulf experience is must. Experience in KOC/KNPC is an added advantage.


Salary: Kuwait Dinar 915 + Free Accommodation + Free Food 


Senior Electrical Technician
Diploma in Electrical with 8 years experience in maintenance & repair of all electrical equipment; operate HT / LT network; troubleshooting of motors, circuit breakers, starters, transformers, VSDs, UPS; Microprocessor boards
INDUSTRY: OIL & GAS Refinery (Other industry experience not applicable )

Education: DIPLOMA  ELECTRICAL (3 YEARS FULL TIME)


Electrical - Maintenance
Engineering in Electrical with 8+ years experience in maintenance & repair of all electrical equipment; operate HT / LT network; troubleshooting of motors, circuit breakers, starters, transformers, VSDs, UPS


INDUSTRY: OIL & GAS Refinery (Other industry experience not applicable )


Education: BE ELECTRICAL (4 YEARS FULL TIME)


Gulf experience is must. Experience in KOC/KNPC is an added advantage.


Salary: Kuwait Dinar 915 + Free Accommodation + Free Food 


Maximo System Engineer
B.E / B.Tech in Mechanical / Instrumentation / Electrical with 8 years experience in MAXIMO system. Administers, monitors and manages all the e Beams activities for his discipline.
INDUSTRY: OIL & GAS Refinery (Other industry experience not applicable)


Gulf experience is must. 


Salary: Kuwait Dinar 915 + Free Accommodation + Free Food 

Education: BE - Mechanical / Instrumentation / ELECTRICAL (4 YEARS FULL TIME)


Material Engineer
Degree in Electrical Engineering with 8+ years experience in Inventory & Material management


INDUSTRY: OIL & GAS Refinery (Other industry experience not applicable)


Education: BE - ELECTRICAL ( 4 YEARS FULL TIME) 

Gulf experience is must. 
Salary: Kuwait Dinar 915 + Free Accommodation + Free Food 
Lead Planning - Mechanical 

Diploma Mechanical with 8 years experience in relevant field. Experience in the Maintenance of gas turbines/compressors, pumps, vessels, coolers, heat exchangers. Preparing material, tools & equipment requirements of P.M. activities (machinery overhauls & inspection, checks)


Supervisor - Maximo

Diploma in Mechanical with 8 years experience in repair and maintenance of Turbines, Compressors, Pumps and the Static Process Equipment specified in Technical Specification,, with at least the last four (4) years in Maintenance & shutdown planning. Uses MAXIMO or eBeams application for creating necessary Work Orders, Material Reservations and Progress tracking etc


Education: Diploma - Mechanical ( 3 YEARS FULL TIME) 

Gulf experience is must. 


Contract: Till 2021 (for all the positions)


Interview Date: 15.1.2017, Sunday [Travel allowance not provided for attending interviews.] & No SKYPE OR Telephonic interviews.


Recruiter Name:K RAMAKRISHNAN
Email Address:
Ramakrishnan@falconservices.in
Telephone:91-22-26670852

Interview for Booster Station Operator and Pipeline Operator, Kuwait

Pipeline Operator

Secondary School + 4 Years Experience in chemical handling.

1. Job Description:
1.1 Carryout patrol duties within assigned area to check condensate, transmission and fuel collecting pipelines and associated equipment for leakage grease valves as required and reports defects or anomalous conditions to Area Coordinators .
1.2 Checks and operates drip barrels located along side pipelines and distributed all over fields areas, visually inspects effluents condition to ensure no oil mixture exists with gas, records type of effluent and reports abnormalities to his supervisor. This includes, ensuring that no human beings or animals are in or around the oil pits prior to operation.
1.3 Carryout gas and condensate sampling operations, connects hoses, carries tools and equipment, transports cylinders to and from the Company or other laboratory and cleans/prepares sampling cylinders for next operation.

1.4 Switches gas and condensate streams by operating manual, motor and gas operated valves.
1.5 Checks changes all meter record charts relating to flow, pressure, temperature and gravity regularly on daily / weekly basis, services record and reports any malfunction as necessary. Collects average readings from charts on site as instructed, and cross checks gauges or accuracy.
1.6 Reports on excavations or any maintenance work-taking place near gas and condensate pipelines. Takes immediate action to stop work when hazardous situation exists and reports action taken to his supervisor.
1.7 Carries out inspection tours to various gas and condensate installations to ensure safe conditions during maintenance work by contractors. Checks equipment after maintenance work. Reports excavations and/or maintenance work near the gas & condensate installations and takes immediate action to report if hazardous condition exists.
1.8 Assists in monitoring domestic gas odorisation system to Ahmadi residential area, checks odorant units weekly to ensure required specifications are correct.

APPENDIX-D
Job Descriptions, Qualifications and Experience for the Contractor's Non- Kuwaiti Personnel
Page 9 of 19
1.9 Ensures availability and working condition of all firefighting equipment and reports discharged extinguishers, containers and cylinders.
1.10 Carries out non-routine activities such as, punch listing. Adds chemical dosing needed for operating unit or system.
1.11 Operates, checks and follows up the systems of Supervisory Control and Data Acquisition (SCADA) and Distributed Control System (DCS).
1.12 Carries out pigging activities including gas and liquid. Reports malfunctions and attends to maintenance work.
1.13 Operates checks and handles all activities & duties related to flare and flaring systems.

Salary: KWD 440  TO KWD 540 + Free Food + Free Accomodation


Booster Station Operator
Diploma + 6 Years Experience in Process or Plant Operation in Oil & Gas industry.

1. Job Description:
1.1 Carry out all activities in accordance with ISSOW including the following:
1.1.1 Comprehensive and detailed Risk Assessments and Toolbox Talks.
1.1.2 Stop and re-asses any job where change is identified.
1.2 Report all accidents and incidents.
1.3 Carry out Emergency Response duties in accordance with client's requirements.
1.4 Main Responsibilities of Role:
1.5 Report all accidents and incidents.
1.6 Operate process equipment and utility systems in accordance with operating procedures to maximize production.

1.7 Carry out watch keeping duties to ensure integrity and stability of operation is maintained.
1.8 Prepare and isolate equipment for maintenance activities and reinstate on completion.
1.9 Carry out first line maintenance activities on the process plant and utility systems.
1.10 Report any defects or anomalies in a timely manner.
1.11 Respond to process trips and unplanned equipment stoppages in a timely manner shift change.
1.12 Use core trade skills to support operations and maintenance teams where required.
1.13 Participate in Root Cause Analysis activities to improve process reliability.
1.14 Identify and propose ideas and solutions that will increase efficiency in production, cost or time without loss of integrity and present to management.
1.15 Support and improve team performance by sharing knowledge and best practices.
1.16 Participate in competence schemes including any multi skilled role in accordance with the relevant competence framework.

1.17 Daily activities like preparing check list.
1.18 Attended major shutdowns. Unit followed in detail start up and shutdown activities.
1.19 Coordination with operations, mechanical and electrical supervisory personnel to identify causes of abnormal operations and verify correct and accurate operation of instrumentation.
1.20 Making adjustments to process equipment as instructed.
1.21 Check and observe on an ongoing basis, the proper functioning of assigned equipment by reading gauges, levels, amperages and recording such findings on a log sheet, identifying the equipment, the specific readings and time and date of occurrence.
1.22 Inform the Shift Supervisor or Panel Operator of any unusual observations such as noise, spillage, critical gauge readings and leakage, making process adjustments in accordance with instructions from the Panel Operator.
1.23 Check the pressure and proper condition of all safety and fire equipment in designated area such as checking of seals and pressure gauges, verifying the condition of hoses and fire blankets, and reporting any abnormal findings to the Panel Operator.

1.24 Ensure compliance with safe operations procedures, Includes following up and checking the log sheets, comparing with panel readings, reporting to Supervisor any anomalies and making any necessary adjustments such as checking and topping tank levels and adjusting rates.
1.25 Compile with all safety and fire regulations, including the use of protective clothing and equipment and ensure that personnel working in the area comply with safety procedures. Maintains the area in a clean and safe condition.
1.26 Assist in the preparation for maintenance of assigned static equipment in accordance with Daily Instructions by performing under detailed instructions a number of preparatory activities such as purging of vessels, closing of valves, draining of pumps and cooling down heaters.
1.27 Continuous monitoring of on-going maintenance activities in the designated work area and commissioning of repaired or maintained equipment to ensure functionality of redundancy.
1.28 Record activities in both field and local control rooms, a variety of parameters as required, a variety of readings, such as gas flows, temperatures, levels, flow rates and vibrations, and records unusual occurrences after reporting them to Control Room.

1.29 Starts up, shut-downs, isolates and adjusts flow rates, levels and temperatures on pumps, motor, tanks, loading arms, compressors and flares as instructed.
1.30 Responsible for the support of Company Safety, environment and Quality policies and programs, and carrying out specific duties and responsibilities related to his job as spelled out in Management system documentation policies, procedures, local documentation, Management System Manual, Safety manual and other related documents.
1.31 Witness and facilitate the final handover of the project equipment to the Operations teams.
1.32 Adopt a flexible working attitude to provide support across all departments to ensure team success.
1.33 Operates, checks and follows up the systems of Supervisory Control and Data Acquisition (SCADA) and Distributed Control System (DCS).
1.34 Carries out pigging activities including gas and liquid. Reports malfunctions and attends to maintenance work.
1.35 Operates checks and handles all activities & duties related to flare and flaring systems.
Salary: KWD 675 + Free Food + Free Accomodation
Interview at Mumbai on 7.1.2017
For interviews registration, please call us between : 9:00 am to  6:30 pm.


Recruiter Name:Ramakrishnan K
Email Address:
Ramakrishnan@falconservices.in
Telephone:9930142001

Multiple Vacancies in Ezdan Palace Hotel, Qatar

EZDAN PALACE HOTEL 5 star luxury hotel with Gorgeous Ballroom and Fine Dining restaurant located in the most affluent area in the State of Qatar 


Position : IT SUPPORT SPECIALIST


Candidates must have min 5 years experience in Hotel Industries.


Position : ENGINEERING SUPERVISOR 


Position : AV TECHNICIAN 


Job Description: 


Hands-on with Life-Size, Polycom, Cisco codec and telepresence.
Local support on VC calls during a broadcasting event, Q&A session, VVIP events.
Take care of AV-VC, training rooms integrated with Projector, Audio System, AV switcher, Video Conferencing System, Creston Touch Panel, Processor Light Controller Room booking system etc.
Supporting the VC broadcasting event and display the event live on all floor TV screens. Technically handle Audio Visual Systems like multimedia Projector, amplifier, speaker, mice, processor, switcher, interactive whiteboard and all Connector (audio & video).

Specialization in Follwings
1. Mic & DJ Setup
2. Electrical Fittings
3. Projector and Screen Setup
4. Video Conferencing Setup
5. MATV Operations

For above positions candidates must be have min 3 - 7 years experience 
Position : BMS OPERATOR


BMS (Building Management System) is a computer based control system installed in buildings that controls and monitors the buildings mechanical and electrical equipment such as Ventilation, Lighting, Power system, Fire system and Security system. 


For above positions candidates must be have min 3 - 7 years experience 


Interested candidates need to apply immediately at yazdaanoc@gmail.com, imran@nassers.org with following documents. 


1. Updated Resume 
2. Passport Copy 
3. White Background photo


Mr. Imran 
Tel : 022-61957500 extn : 501

Senior IT Officer for Jekson Vision Pvt Ltd in Dammam, Saudi Arabia

Jekson Vision is headquartered at Ahmadabad, India and also has a presence in USA and Middle East.
To provide high quality products at the best market prices, Jekson Vision focuses in value research, design, software and engineering. .

Jekson Vision has added more than 200 satisfied tier one pharmaceutical companies to its list of satisfied customers, with operations from USA, Middle East (Dubai, UAE) and India. Jekson Vision products are designed in accordance with international quality standards such as GMP, FDA, 21CFR part 11 (Pharmaceutical industries), ISO and CE.

This Position will be on our business associate roles at Tabuk / Dammam-KSA

1.Having good experience in installing and configuring computer hardware, operating systems applications, printers and scanners associated with laboratory and manufacturing instruments/equipments (Quality control instruments and Production department machines)
2.Having good experience for troubleshooting system and network problems and diagnosing and solving hardware or software faults; 
3.Having experience in monitoring and maintaining computer systems and networks.
4.Having experience to supporting the roll-out of new IT applications and tools.
5.Having good experience to manage the GMP related IT projects in Laboratory and Manufacturing area. 
6.Having experience in setting up new users accounts and profiles and dealing with password issues.
7.Having experience to handle and manage the backup activity for the GMP computerized system.
8.Interacting with staff or cross functional team members through a series of actions, either face-to-face or over the telephone, to help set up systems or resolve issues. And providing support, including procedural documentation and relevant reports. 

9.Having knowledge in pharmaceutical regulations like US FDA, EU GMP, SFDA. 
10.Prepare and implement IT related policies and procedures (SOP) and ensure the compliance.
11.Having knowledge good documentation practice and maintain IT related documents as per internal SOP.
12.Having knowledge about softwares related to manufacturing and laboratory such as EMS, BMS, Empower, SCADA. 2D and Serialization process, SAP PM and SOLMAN modules, DMS (Document Management System).
13.Works with project teams to help implement Internal Systems, Quality System (Change control, CAPA,..). 
14.Suggests areas for improvement in internal processes along with possible solutions.

• Minimum 3-5 years of experience as a IT support team in life science (Pharmaceuticals Manufacturing companies) domain with having experience in IT compliance.
• Administrating and troubleshooting of computerized system in Laboratory and manufacturing area.
• MS-Office (word, Excel and power point).
• Ability to communicate with others.
• Knowledge of preparing financial reports.

Ms. Neha Makawana
careers@jeksonvision.com