Interview for Booster Station Operator and Pipeline Operator, Kuwait

Pipeline Operator

Secondary School + 4 Years Experience in chemical handling.

1. Job Description:
1.1 Carryout patrol duties within assigned area to check condensate, transmission and fuel collecting pipelines and associated equipment for leakage grease valves as required and reports defects or anomalous conditions to Area Coordinators .
1.2 Checks and operates drip barrels located along side pipelines and distributed all over fields areas, visually inspects effluents condition to ensure no oil mixture exists with gas, records type of effluent and reports abnormalities to his supervisor. This includes, ensuring that no human beings or animals are in or around the oil pits prior to operation.
1.3 Carryout gas and condensate sampling operations, connects hoses, carries tools and equipment, transports cylinders to and from the Company or other laboratory and cleans/prepares sampling cylinders for next operation.

1.4 Switches gas and condensate streams by operating manual, motor and gas operated valves.
1.5 Checks changes all meter record charts relating to flow, pressure, temperature and gravity regularly on daily / weekly basis, services record and reports any malfunction as necessary. Collects average readings from charts on site as instructed, and cross checks gauges or accuracy.
1.6 Reports on excavations or any maintenance work-taking place near gas and condensate pipelines. Takes immediate action to stop work when hazardous situation exists and reports action taken to his supervisor.
1.7 Carries out inspection tours to various gas and condensate installations to ensure safe conditions during maintenance work by contractors. Checks equipment after maintenance work. Reports excavations and/or maintenance work near the gas & condensate installations and takes immediate action to report if hazardous condition exists.
1.8 Assists in monitoring domestic gas odorisation system to Ahmadi residential area, checks odorant units weekly to ensure required specifications are correct.

APPENDIX-D
Job Descriptions, Qualifications and Experience for the Contractor's Non- Kuwaiti Personnel
Page 9 of 19
1.9 Ensures availability and working condition of all firefighting equipment and reports discharged extinguishers, containers and cylinders.
1.10 Carries out non-routine activities such as, punch listing. Adds chemical dosing needed for operating unit or system.
1.11 Operates, checks and follows up the systems of Supervisory Control and Data Acquisition (SCADA) and Distributed Control System (DCS).
1.12 Carries out pigging activities including gas and liquid. Reports malfunctions and attends to maintenance work.
1.13 Operates checks and handles all activities & duties related to flare and flaring systems.

Salary: KWD 440  TO KWD 540 + Free Food + Free Accomodation


Booster Station Operator
Diploma + 6 Years Experience in Process or Plant Operation in Oil & Gas industry.

1. Job Description:
1.1 Carry out all activities in accordance with ISSOW including the following:
1.1.1 Comprehensive and detailed Risk Assessments and Toolbox Talks.
1.1.2 Stop and re-asses any job where change is identified.
1.2 Report all accidents and incidents.
1.3 Carry out Emergency Response duties in accordance with client's requirements.
1.4 Main Responsibilities of Role:
1.5 Report all accidents and incidents.
1.6 Operate process equipment and utility systems in accordance with operating procedures to maximize production.

1.7 Carry out watch keeping duties to ensure integrity and stability of operation is maintained.
1.8 Prepare and isolate equipment for maintenance activities and reinstate on completion.
1.9 Carry out first line maintenance activities on the process plant and utility systems.
1.10 Report any defects or anomalies in a timely manner.
1.11 Respond to process trips and unplanned equipment stoppages in a timely manner shift change.
1.12 Use core trade skills to support operations and maintenance teams where required.
1.13 Participate in Root Cause Analysis activities to improve process reliability.
1.14 Identify and propose ideas and solutions that will increase efficiency in production, cost or time without loss of integrity and present to management.
1.15 Support and improve team performance by sharing knowledge and best practices.
1.16 Participate in competence schemes including any multi skilled role in accordance with the relevant competence framework.

1.17 Daily activities like preparing check list.
1.18 Attended major shutdowns. Unit followed in detail start up and shutdown activities.
1.19 Coordination with operations, mechanical and electrical supervisory personnel to identify causes of abnormal operations and verify correct and accurate operation of instrumentation.
1.20 Making adjustments to process equipment as instructed.
1.21 Check and observe on an ongoing basis, the proper functioning of assigned equipment by reading gauges, levels, amperages and recording such findings on a log sheet, identifying the equipment, the specific readings and time and date of occurrence.
1.22 Inform the Shift Supervisor or Panel Operator of any unusual observations such as noise, spillage, critical gauge readings and leakage, making process adjustments in accordance with instructions from the Panel Operator.
1.23 Check the pressure and proper condition of all safety and fire equipment in designated area such as checking of seals and pressure gauges, verifying the condition of hoses and fire blankets, and reporting any abnormal findings to the Panel Operator.

1.24 Ensure compliance with safe operations procedures, Includes following up and checking the log sheets, comparing with panel readings, reporting to Supervisor any anomalies and making any necessary adjustments such as checking and topping tank levels and adjusting rates.
1.25 Compile with all safety and fire regulations, including the use of protective clothing and equipment and ensure that personnel working in the area comply with safety procedures. Maintains the area in a clean and safe condition.
1.26 Assist in the preparation for maintenance of assigned static equipment in accordance with Daily Instructions by performing under detailed instructions a number of preparatory activities such as purging of vessels, closing of valves, draining of pumps and cooling down heaters.
1.27 Continuous monitoring of on-going maintenance activities in the designated work area and commissioning of repaired or maintained equipment to ensure functionality of redundancy.
1.28 Record activities in both field and local control rooms, a variety of parameters as required, a variety of readings, such as gas flows, temperatures, levels, flow rates and vibrations, and records unusual occurrences after reporting them to Control Room.

1.29 Starts up, shut-downs, isolates and adjusts flow rates, levels and temperatures on pumps, motor, tanks, loading arms, compressors and flares as instructed.
1.30 Responsible for the support of Company Safety, environment and Quality policies and programs, and carrying out specific duties and responsibilities related to his job as spelled out in Management system documentation policies, procedures, local documentation, Management System Manual, Safety manual and other related documents.
1.31 Witness and facilitate the final handover of the project equipment to the Operations teams.
1.32 Adopt a flexible working attitude to provide support across all departments to ensure team success.
1.33 Operates, checks and follows up the systems of Supervisory Control and Data Acquisition (SCADA) and Distributed Control System (DCS).
1.34 Carries out pigging activities including gas and liquid. Reports malfunctions and attends to maintenance work.
1.35 Operates checks and handles all activities & duties related to flare and flaring systems.
Salary: KWD 675 + Free Food + Free Accomodation
Interview at Mumbai on 7.1.2017
For interviews registration, please call us between : 9:00 am to  6:30 pm.


Recruiter Name:Ramakrishnan K
Email Address:
Ramakrishnan@falconservices.in
Telephone:9930142001