Senior Mechanical Technician and Mechanical Technician for Qatar

Positions and job description

1). Senior Mechanical Technician

Salary -3500-4000

Working Hour 8 (Overtime and Special Overtime shall be admissible as per Qatar Labor Law.)

Contract Duration Long Term - 05 years

a) Must have more than 10 years experience in mechanical maintenance works in the oil & Gas / Petrochemical or Power Generation industry.

b) Educational qualifications: OND or equal in a relevant discipline or standard based qualification (NVQ level 3) or equivalent. nb. May be required to undertake Competency Based test witnessed by the COMPANY designated person.

c) Must have a fairly good knowledge & understanding of various process equipments

d) Must be able to read, write and speak English (IELTS 6 Equivalent) and to be able to communicate with the majority manpower in their language.

e) Must be capable of supporting QA/QC and HSE compliance audits, site procedures and working instructions.

f) Must be trained and proficient with alignment of rotating equipment with reverse dial gauge alignment and preferably rotalign / optalign equipment.

g) Verifies alignment and tolerances of moving parts, using measuring instruments, such as dial indicators and thickness gauges.

h) Must be able to interpret job requests, perform tests to confirm the problem and propose repair methods without permanent supervision.

i) Must have experience in and be able to place and remove spades and to open and close pipe flanges, recognise the gasket types and types of bolts / nuts.

j) Minimum 5% should be skilled in assembly, testing and fixing of safety relief valves and all kinds of valves at site

k) Performs valve testing by using test benches or field testing.

l) Must have experience in and be able to perform proper slinging and lifting with chain-blocks and small cranes, use of Gin wheel lifting.

m) Should be able to deputise for the Supervisor and act as Leader to less experienced technicians.

n) Must have experience in and be able to execute preparation of work packs, e.g. to carry out all the necessary work planning and preparations to be able to execute the site works and compile the relevant information in a work pack for submission with the Permit to Work request.

o) Meets all minimum requirements for Mechanical Technician.

p) Multiskilled craftsman as defined in Section 4, Appendix 13.

2) Mechanical Technician

• Salary -2500-3000

• Working Hour 8 (Overtime and Special Overtime shall be admissible as per Qatar Labor Law.)

• Contract Duration – Long Term - 05 years

a) Must have more than 6 years’ experience in mechanical maintenance works in the oil & Gas /Petrochemical or Power Generation industry.

Educational qualifications: ONC (Ordinary National Certificate)or equal in a relevant discipline or standard based qualification (NVQ level 2) or equivalent. nb. May be required to undertake Competency Based test witnessed by the COMPANY designated person.

b) Must have a fairly good knowledge & understanding of various process equipment's

c) Must be able to read, write and speak English. (IELTS 5 Equivalent)

d) Must have a good understanding of QA/QC and HSE compliance audits, site procedures and working instructions.

e) Must be able to place and remove spades and to open and close pipe flanges, recognise the gasket types and types of bolts.

f) Must have experience in and be able to perform a proper slinging and lifting with chain-blocks.

g) Must have experience in and be able to properly pull-up gland packing and replace it.

h) Must have experience in and be able to remove and assist in re-installing pumps, motors and mixers.

i) Must have experience in and be able to replace V-belts.

j) Must be able to open manholes on vessels and columns and remove internals.

k) Must have received training and have experience in tightening bolts with a manual torque wrench.

l) Must have experience in and be able to perform an alignment with reverse dial gauge method under supervision.

m) Must have experience in and be able to execute hydro tests on piping and static equipment.

n) Must be able to prepare work packs for respective work SCOPE and report close out activities for capture work history in CMMS.

Must be able to read, write and speak English.

Oil & Gas ,Petrochemical, GTL Plant ( Gas to Liquid ),Power Generation

Greetings from Shella Consultants !!!

We have below requirements for one of our oil& Gas Client - Qatar

.

Senior Mechanical Technician ( min 10 yrs must ) ..( 33 Position ) Basic Salary- 3500-4000 QR for 8 hrs

Mechanical Technician .....(min 6 yrs must ) ............ ( 44 Position ) Basic Salary-2500-3000 QR for 8 hrs

If interested, Kindly send your application with mandatory details or it will not be considered on jobs@shellaconsultants.com

Before applying the position Please Read Job Details. and apply

Position Applied:-----------------

First name same as passport--------------

last name same as passport----------------------------

All industries type that you have worked till now(e.g oil and gas , GTL Plant etc)-

Contact Details :------------------

Passport Number :-------------------

Total Experience:------------------

Gulf experience :-----------------------

LONG TERM :--------------

No of shutdown or turn around:--------------------

Do you have experience in Oil and Gas / Petrochemical / LNG industry? If yes then specify years:

Highest qualification:------------------

Age:-----------------------

Location :--------------------------------

Name of Current / Last Company Name:--------------------

Current CTC IN QAR:----------------------

Espected CTC IN QAR:--------------------------------------

Notice period-------------------------------------------------

Have you read job description and Salary (Y/N):-----------------------

Can you read, write and speak English. --------------------------

If Interested ..please share the CV’s along with Educational Qualification Certificates and Experience Certificates on jobs@shellaconsultants.com