Multiple Vacancies in Zamil Offshore Services, Saudi Arabia

Marine Dock Master

MINIMUM REQUIREMENTS & QUALIFICATION:

Fluently speak, read and write English.

Considerable knowledge of the structure of vessels, stress points, load factors, cradle positioning, and blocking of vessels.

Considerable knowledge of vessel stability calculations and docking plan development.

Considerable knowledge of rigging and aligning heavy equipment.

Considerable knowledge of the safety requirements of rigging heavy equipment.

Considerable knowledge of the floating dock capabilities and the associated mechanical, electrical, and structural systems.

General knowledge of the shipbuilding trades and of shipyard maintenance requirements.

Ability to plan, organize and supervise the work of skilled employees.

General skill in the operation of heavy equipment.

Graduation from high school and ten (10) years of experience in a ship repair facility with concentration on blocking, cradling and docking of vessels and the operation of dry-dock equipment; or an equivalent combination of education and experience.
 
PRINCIPAL DUTIES:

Plans and oversees the dry-docking of vessels using Saudi Aramco floating dry-docks.

Reviews docking plans for technical adequacy.

Checks hull contours and structural members of a vessel to determine and ensure the proper placement of lifting blocks; is completely responsible for a vessel during the entire operation.

Maintains the floating dock’s associated equipment and systems, i.e., pumps, valves, tanks, cranes, and machineries.

Maintains vessels cradles.

Operates crane, forklift, and other heavy equipment.

Supervises skilled riggers who handle, remove, install and align heavy shipboard equipment. Reports to the Marine Shipyard Superintendent and is reviewed through personal discussions and the maintenance of a safe and efficient hauling and dry-docking schedule.

Monitors safety on the floating dock and the vessel on it.

Performs other duties as assigned.

Responsible for developing the blocking configuration for each vessel, docking and undocking procedures, and all related safety practices.

Responsible for the operation and maintenance of the floating dry-dock, cradle docking small vessel at jetty cradles.

During docking/undocking operations, dock master has the overall responsibility.

Radio Radar Observer

Job Description :Shall at all times during the term of the Contract be in possession of a valid Radar Observer’s Certificate issued by the British Department of Transport or equivalent acceptable to SAUDI ARAMCO. 
Shall be capable of manning the Port Radar Surveillance System and providing accurate information to the Ships’ Masters and Harbor Pilots to assist vessels to safely navigate through Channel and Port.  

Facility Engineer

Qualification :

Bachelor’s Degree in Civil Engineering from an accredited college or university.

Minimum of seven (7) years engineering experience in the areas civil project, design and establish regular preventive schedule to maintain buildings and stations in a good operation conditions as per Saudi Aramco engineerings standards and regulations.
Shall be experienced in preparing work specifications packages of buildings, technical reports, quality control, execution repair activities to expedite the WORK in the most safe and economic manner to meet agreed production schedules.

Refit Coordinator

MINIMUM REQUIREMENTS & QUALIFICATION: 

Fluently speak, read and write English.

General knowledge of work performed by the various trades and the ability to direct and coordinate the efforts of trades such as sandblasting, painting, carpentry, electrical, plumbing, pipe fitting, welding, painting, cement finishing, heating, air conditioning, and sheet metal services.

Marine Engineer / Naval Architect degree holder.

Fifteen (15) years ship building/repair experience essential, of which a minimum shall be ten (10) years supervisory experience in the areas of ship repair and conversion.

Possess good organizational skills.

Possess good Management skills - people and resources.

Possess basic working Knowledge of Windows applications including Microsoft Projects.

 PRINCIPAL DUTIES:

Manage ship repair projects.

Manage and coordinate works of other contractor.

Review and enforce contractor Loss Prevention program.

Ensure customer satisfaction.

Plans, schedules and assigns work via oral or written instructions to be accomplished on emergency/service, preventive maintenance, minor or specific jobs.

Resolves unforeseen technical and trade problems in the unit.

Ensures schedules are met, or reports reasons for non-compliance to immediate supervisor, possibly requiring a revision of estimate sub mittal.

Attends formal and informal meetings with immediate supervisor and planning personnel concerning ways and means of accomplishing the work projects, and where possible, improving efficiency.

Establishes and provides the necessary services to fulfill the operation needs, this includes assisting when and where necessary.

Instructs subordinates on difficult assignments, the proper use of tools, equipment, and new materials of the trade.

Motivates subordinates in areas of morale and completing jobs under adverse conditions, such as moving an employee from one job to another before completion and working on several jobs simultaneously.

Inspects and reviews the progress of jobs, complimenting and disapproving when and wherever necessary.

Hears and attempts to resolve grievances and complaints and cooperates in the investigation of formal or informal discrimination complaints ensuring expeditious action.

Maintains communication between different parties, coordinates the work with all parties involved, including operation personnel, management, planning personnel, utility personnel, and craftsman, and recommends overtime as needed.

Monitors cost of work being performed, specifies materials needed and arranges procurement.

Ensures schedules are met or reports non-compliance.

Directs and coordinates the work in areas such as structural and finish carpentry, electrical, plumbing, pipe fitting, welding, painting, cement finishing, heating, air conditioning, sheet metal, masonry, and sign making work.

Interprets prints, prepares layouts, makes sketches, and recommends changes in methods and to work plans for cost reductions.

Shop/ Planner (Electrical & A/C)
 

MINIMUM REQUIREMENTS & QUALIFICATION:

Knowledge of electrical, air conditioning and refrigeration.

Knowledge of the procedures associated with preparing job orders and work packages.

Ability to read and interpret blueprints, instructions, specifications and other related materials.

Ability to prepare work scope packages using computer software including EXCEL, ACCESS, WORD, MICROSOFT PROJECT and Windows NT. etc.

Plans and schedules work, reviews work orders, plans and estimates.

Discusses technical aspects of the work with subordinate painting electrical, air conditioning and refrigeration craftsmen.

Plans the assignment of work based on overall work status, priorities, employee performance and capabilities.

Communications ability, ability to supervise. 
Minimum of five (5) years experience in electrical, air conditioning and refrigeration trade practice

Ten (10) years varied shipyard experience in electrical, air conditioning and refrigeration trade with a minimum of three (3) years experience in planning, scheduling and tracking of shipyard work trades.

Fluently speak, read and write English.
PRINCIPAL DUTIES:

In addition to the Basic Requirements you will be responsible for analyzing work to be accomplished in the light of accepted trade practices, pertinent specifications, drawings, and sketches.

Prepares detailed plans specifications and cost estimates for the maintenance, construction, and alterations to vessels A/C, electrical, and communications distribution systems involving electrical power and light distribution systems, communications systems, generators, motors, transformers electrical control devices and instruments, wiring and similar equipment.

Determines amount and type of material needed. May on a regularly scheduled basis or on specific request, perform inspection on station electrical facilities including building wiring, electrical distribution systems, communication systems and other related electrical systems, structures and equipment.

The incumbent must be current and familiar with the National Electrical Code.

Prepares written reports of such inspections including extent of deficiency, major items of material required to correct them and the estimated cost including labor and material.

Prepares sketches and detailed working drawings as directed and where the work is complicated and requires further job description in addition to written work order.

Prepares specifications for facilities contracts and other contracts as directed and administers same, which includes direction and inspection of work performed by contractors.

Prepares specifications and shop sketches and drawings as required to facilitate accomplishment of work.

May as requested and/or directed assist other marine operating division where his experience and knowledge can be utilized in problem areas.

Electronic Controls Mechanic

 MINIMUM REQUIREMENTS & QUALIFICATION:

Knowledge of electrical and electronic equipment and controls used in shipboard.

Ability to read and interpret drawings and specifications.

Ability to use various types of diagnostic equipment; and the ability to troubleshoot problems and take corrective action.

Install, maintain, overhaul, repair, calibration and recondition of digital computer systems, electronic test and measurement equipment, computer numerically controlled machinery and various other electronically controlled machinery and equipment.

Trade school with five (5) years’ experience as an Electronics Mechanic involved with the maintenance, repair and troubleshooting of shipboard electronic systems.
 

PRINCIPAL DUTIES:

Troubleshoot, repair, calibrate, test and install industrial electronics controlled equipment such as solid state circuitry, programmable controllers, variable frequency drives, and solid state digital power supplies on shipboard equipment and systems working on microprocessors, computers and associated peripheral equipment such as keyboards.

Test, repair, and replace components and parts such as resistors, capacitors, transistors, diodes, integrated circuits, regulated power supplies, relays, switches and motor drive controls.

Align and calibrate equipment using calibration standards and alignment procedures when available and occasionally aligning by use of schematics and available technical data.

Upload and download of software files using a laptop interface.

Perform diagnostic troubleshooting techniques to isolate faults using a wide variety of sophisticated test equipment such as digital volt meters, oscilloscopes, signal generators, logic analyzers and line monitors.

Work closely with engineers to resolve problems and make improvement recommendations.

Out Board Motors (OBM) Mechanic

MINIMUM REQUIREMENTS & QUALIFICATION:

Knowledge of the techniques and methods used to determine and solve mechanical problems.

Completion of grammar school and one year of progressive experience in the repair of engines and mechanical equipment; or an equivalent combination of education and experience.

Working knowledge of the operating principles of reduction gears, hydraulic, air, and electric control systems; and vacuum and pressure pumps.

Ability to determine the cause of, and procedures to follow in repairing malfunctioning equipment.

Physical strength to move heavy objects and perform manual labor for considerable periods of time.

Completion of grammar school and three years of progressive experience in the repair of gearboxes, transmissions, hydraulic, air systems, and components, preferably in the ship repair or shipbuilding industry; or an equivalent combination of education and experience.PRINCIPAL DUTIES:

Repairs hydraulic and other control devices.

Overhauls of diesel and gasoline engines and rebuilds components.

Maintains records of work performed.

Repairs, overhauls and adjusts hydraulic control valves, hydraulic pumps and motors.

Repairs, overhauls and adjusts clutches, and couplings.

Replaces propeller shafts and bearings.

Repair and overhaul pneumatic and hydraulic systems and controls.

Performs related duties as required.

Shift Coordinator

MINIMUM REQUIREMENTS & QUALIFICATION:

Fluently speak, read and write English.

Considerable knowledge of the Marine Port control trades including methods, materials and special techniques.

Ability to plan, coordinate and supervise the work of subordinate personnel.

Considerable knowledge of the safety requirements of rigging heavy equipment.

Ability to plan, organize and supervise the work of skilled employees.

General skill in the operation of heavy equipment.

Graduation from high school and ten (10) years of experience in Marine port control activities; or an equivalent combination of education and experience. At least three years of the required experience must be at sea going.

Experience in general cargo handling and crane operations.

Valid driver's license. 

Operating multi-channel radios.
 
PRINCIPAL DUTIES:

 Coordinates the Marine operations at West Pier and acts as liaison providing work direction to units at Abu Ali, Ju'aymah and Safaniya during after hours, weekends and holidays.

Shall have daily contact with all Marine Unit-heads and Foreman for pertinent instruction on operations. 

Ensures the Shift Controlman allocates berths to each Marine    craft prior to arrival and that he makes optimum use of berths, buoys and anchorages at West Pier. 

Ensures the Supervising Pier Controlman coordinates truck and heavy crane movements to avoid congestion and ensures efficient movement of materials onto and away from pier. Also  ensures that he determines priorities for use of cranes and labor crews assigned to West Pier. 

Ensures continuous contact is maintained with other units on  operational changes at pier effecting these units.

Acts in the event of emergencies, such as fires or equipment    failure to bring conditions under control by issuing appropriate orders and taking other necessary action. 

Insures safety of all operations under his control in conformity with approved Loss Prevention procedures. Continually inspects area to ensure an overall efficient operation.

Shares responsibility for cleanliness and orderliness of Pier with other Supervisors.

Planner/ Scheduler

 MINIMUM REQUIREMENTS & QUALIFICATION:

Fluently speak, read and write English.

Minimum five (5) years’ experience in the specified trade of practice.

Minimum of ten (10) years varied shipyard experience with a minimum of three (3) years’ experience in planning, scheduling of the trade practice.
 

PRINCIPAL DUTIES:

Employee should visit Vessels requesting services at field to determine needs; gather necessary information; and develop plans to complete the repair and/or refit..

Employee should possess the necessary knowledge and have varied hands on experience with a Computerized Maintenance Management System (CMMS) preferably SAP. 

Employee should be capable to interact with the CMMS to process Maintenance Notifications, Maintenance Orders, Purchase requisitions, Purchase Orders, Cost Analysis, Planning and Scheduling, etc..

Employee prepares specifications, scope of work, and material requirements. Also, prepare shop and field drawings and/or sketches in conjunction with the Port Engineering unit..

Employee estimates labor and material requirements and determines an appropriate job sequence plan using a variety of estimating practices.

Employee prepares bill of materials for each refit, including description, quantity, specifications.

Employee prepares work and timetable schedules; monitor progress of refit/repair, conduct inspections, and report to unit supervisor.

Employee acts as an inspector for various maintenance and vessel refits.

Employee recommends priorities, and prepares justification.

Employee performs related duties as assigned.

Nationality : Indian

Email : rec19@asmacs.net

                                                                                                                                                                   

Note : Please give project No. ZAO-1/15 in subject line while applying