Electrical Maintenance Engineer (EENG)
B.Sc. degree in electrical from a university recognized by the Kuwait Society of Engineers.
Eight (8) years experience in Electrical Maintenance field at Petroleum Oil Refinery / Petrochemical Industry out of which 4 years must be in a responsible position as an Electrical Maintenance Engineer.
Should be fully conversant with Electrical Maintenance & troubleshooting of HV/MV/LV switchgears including SF6 switchgears underground cable, power& distribution transformers, switchgears & control, motors & motor control centers, A.C. / D.C. UPS Power systems Electrical Network & Monitor System, Cathodic protection, lighting, IMCS (Intelligent Motor Control Center) industrial / Building Fire alarm/ Firefighting systems , Skin effect heat tracing, Elevators etc.,
To be able to prepare shutdown maintenance schedules for HV/MV/LV switchgear, Power transformers, motor control centers & motors etc.
To be able to read, write and speak in English fluently.
Safety Engineer
Electrical Engineering Graduate (B.Sc. Electrical Engineering) or equivalent from a University recognized by Kuwait Society of Engineers & Diploma in Industrial Safety with minimum Five (5) years experience in Operation & Maintenance of plants, Industrial Safety in a Chemical, Petroleum, Petrochemical plant.
Have adequate training / experience to co-ordinate and train personnel on first aid and use of personal protective equipment such as SCBA etc.
Control and implement KIPIC Safety Regulations, carryout safety inspections to identify unsafe condition or act, conduct training, impart on- site Safety advice and conduct 15 minutes Safety talk.
Conduct inspection and survey at site to ensure compliance with required safety standards and monitor the companys work permit system procedures
Submit monthly accident report including working man-hours and near-misses to Company Safety Section. Data compilation and report shall be made regarding ISO9001, ISO14001 and OHSAS 18000 etc.
Electrical Foreman
Three-year diploma from a recognized technical training institute in the field of Electrical & Electronics Engineering.
A minimum of ten (10) years continuous heavy industrial experience (preferably in petrochemical or an allied field) as a foreman in the field of MV/LV Electrical Maintenance, trouble shooting and repairing work.
Must be able to write, read and speak in English.
Must be fully conversant with the field interpretation of electrical wiring / layout diagrams.
Must be having a proven knowledge in maintenance, trouble shooting and repair of MV/LV motors, motor control systems, lighting systems & MV/LV underground cable systems.
A/C CONTROL TECHNICIAN
Must have completed formal training program recognized apprenticeship.
Must have technical training Certificate
Must have a minimum Eight (8) years post apprenticeship experience.
Must have previous experience in control / electrical installation and maintenance in heavy commercial HVAC & Refrigeration equipment.
Be able to carry out electric testing.
Be able to perform control / electrical maintenance work as directed.
Be able to carry our trouble shooting activities.
Be able to read electrical and control drawings.
Be able to perform control / electrical installation work on existing and new installation.
Be able to understand HVAC & Refrigeration equipment functions.
Employee should be able to read and write English.
CONTROL VALVE TECHNICIAN
Must be at least Secondary School Graduate and completed a formal trade course in Instrumentation/hydraulics/ mechanical.
Have Seven (7) years of experience in the service and overhauling of control valves.
Must have a high level of trouble shooting skill on control valves.
Skilled in checking, calibrating and repairing of control valves.
Preference for the personnel possess certificate on control valves testing.
Should have good spoken English capability and clearly able to understand. Capable of writing Technical records and forms.
TECHNICIAN INSTRUMENT
Must have passed Higher Secondary School Examination (12 Years of schooling).
Must have passed ITI or NCTVT (two years full time course) in Instrumentation / Electronics trade.
Have Seven (7) years of experience in the maintenance of pneumatic and electronic instruments related to Refinery / Petrochemical.
Must have a high level of trouble shooting skill on electronic & pneumatic instruments.
Should be skilled in the use of diagnostic test equipment, hand tools etc.
Good working knowledge of all types of electronic instruments. Must be conversant with all types of Smart Devices. Have good knowledge of DCS (Like Honeywell), PLCS, and ESDs. Should do independent check from the Marshalling
Able to read, write, speak and understand English. Spoken and understanding
knowledge of Arabic is preferable.
Able to write Technical reports and update records.
FIRE ALARM / FIRE FIGHTING TECHNICIAN
Two-year national trade certificate in the field of electronics / communications engineering from a technical training institute recognized at national level. Three year diploma equivalent to Higher National Diploma (HND) is an advantage.
A minimum of Eight (08) years continuous field experience as a fire alarm / firefighting systems repair, modification & maintenance technician covering domestic and industrial areas.
Must be having a sound working knowledge in troubleshooting and repair work in printed circuit boards.
Must be able to write, read and speak in English.
INSTRUMENT MAINTENANCE ENGINEER
Engineering Graduate in Instrumentation Engineering or equivalent.
Minimum Eight (8) years experience in Maintenance of Process Control Instrumentation in Hydrocarbon Refinery or similar operating plants with 5 years experience in the Oil and Gas Industry.
Knowledge of state of art Distributed Control System and Fault Tolerant Emergency Shutdown System is considered essential. Familiarization with Custody Transfer Systems, Tank Gauging Systems, Modern Blending Systems, Allen Bradley PLCs and Bentley Nevada System will be an advantage.Must Have experience on working with foundation fieldbus instrumentation system.
Should have experience of working in a similar capacity in the Oil and Gas Industry and preferably in a Hydrocarbon Refinery.
Trouble Shooting knowledge on Bently Nevada vibration monitors/ Proximeters.
He will have good communication skills, in English.
INSTRUMENT SUPERVISOR
Three years (Full time course) Diploma in Instrumentation / Electronics Engg. from a recognized technical institution or from a polytechnic.
Minimum of 10 (Ten) years practical experience in maintenance of process control instruments in oil refinery/Petrochemical plants/Fertilizers.
Good working (practical) knowledge about various process control instruments and skill to check, calibrate and repair them up to the DCS system. Should have a good knowledge on the DCS Honeywell system.
Capable of reading and understanding P & ID s, schematic, logic single line wiring diagrams/drawings.
Working knowledge and understanding of Digital Electronics basics and able to use Electronic test equipment for trouble-shooting / testing purposes. Good knowledge in DCS, PLC and ESDs of major international makes.
Must Have experience on working with foundation fieldbus instrumentation system.
Gulf driving license is preferred.
Able to read, write, speak and understand English.
Able to write reports and update records.
ANALYZER SUPERVISOR
Minimum 10 years experience in Maintenance of Process Analyzers in an Operating Hydrocarbon Refinery or similar operating plants in the Oil and Gas Industry.
The incumbent will have an understanding of Petroleum Chemistry and good knowledge of physical methods of analysis and parameters used for qualitative and quantitative assessment of Petroleum products like Smoke Point, Flash Point, Reed Vapor Pressure, Initial Boiling Point, Reed Vapor Pressure, Initial Boiling Point, Viscosity, Specific Gravity / Density, Ph, Conductivity etc. Computer literate and working experience on Windows Operating System.
INSTRUMENT SUPERVISOR (MATERIAL & CONTRACTS)
Must have a Three years Bachelor degree or Diploma from a recognized university with specialization in Computer Operations.
Must have excellent knowledge of documents keeping and sorting, should have excellent Technical knowledge and understand the requirements of Instrument Maintenance Division.
Must have complete knowledge in computer software like Windows XP, MS Excel, WinWord,
Access etc.
Shall have a minimum Five (10) years experience in Material jobs with excellent knowledge in computer applications and fully conversant with Maximo System Software.
Have excellent knowledge in Technical English. Knowledge of Arabic is preferable.
Experience in massive data entering, analyzing / preparing of bar chart etc.
Must know filing system, numbering, record keeping, report preparation, format preparation.
Gulf experience is a necessary prequalification.
Be able to read, write, speak and understand English.
Preferable be able to speak and understand Arabic.
FIRE ALARM & FIRE SUPRESSION SYSTEM SUPERVISOR
Three year diploma equivalent to Higher National Diploma (HND) in the field of electronics /communications engineering from a technical training institute recognized at national level.
A minimum of Twelve (12) years continuous heavy industrial experience (preferably in petrochemical or an allied field) as a foreman in the field of Firefighting Systems i.e. Inert gas, FM200 as well as Linear heat detection cable, latest state of art addressable fire alarm systems maintenance and Electronic Printed circuit boards repair.
Must be fully conversant with the field interpretation of electrical wiring connection diagrams related to Fire Alarm system.
Must be having a proven knowledge in maintenance, trouble shooting, modification and repair of Inert gas, FM200, Linear heat detection cable and, conventional / addressable fire alarm systems and Electronic Printed circuit boards repair.
Must have worked in installation / removal operations of the cylinders of Inert gas, FM 200, or any other firefighting systems.
Must be able to independently work, read and understand standards drawings and manuals.
Must be able to write, read and speak in English.
MECHANICAL FOREMAN
Equivalent to HND, HNC or C & G (advanced ) in Mechanical Engineering.
Ten (10) years experience in the maintenance of stationery equipment as specified in 2 (c) with atleast three (3) years in the foreman position.
Basic knowledge in use of computers and related software (MS-Office..etc).
Shall be well aware of basic refinery safety aspects and use of Personal Protective Equipment.
Performs Maintenance works of stationery refinery equipment such as steam boilers, heat exchangers, vessels, towers, direct fired heaters, tanks and associated piping of all the above equipment.
Have skill to disassemble and reassemble control valves, level gauges, orifice plates in accordance with specifications.
Should be capable of read & understand the engineering drawings and execute the work accordingly.
ANALYZER - TECHNICIAN
Must have passed Higher Secondary School Examination (12 Years of schooling).
Must have passed ITI or NCTVT (two years full time course) in Instrumentation / Electronics trade.
Have Seven (7) years of experience in the maintenance of pneumatic and electronic instruments related to Refinery / Petrochemical.
Trouble Shooting knowledge All types of online analyzers. .
Checking / trouble shooting / component level maintenance in Solid State /
Micro Processor based Alarm Annunciators like Ronan, Panalarm, Rochster.
Good working knowledge of all types of electronic instruments. Must be conversant with all types of Smart Devices. Have good knowledge of DCS (Like Honeywell), PLCS, and ESDs. Should do independent check from the Marshalling racks.
Able to read, write, speak and understand English. Spoken and understanding
knowledge of Arabic is preferable.
Able to write Technical reports and update records.
Nationality: Indian
Email Id: rec19@asmacs.net
No comments:
Post a Comment
Please give your feedback or Job Request here