Any Nationality
Engineer-Structures
PURPOSE:
To undertake services within an engineering environment which may include (but not limited to); scheme investigation, site inspections, data collection and analysis, concept, preliminary and detailed design, reports, NOCs, Specifications & BoQs, works/construction inspection and supervision to progress scheme design, development and construction.
The Engineer will be responsible for the following:
• Highway Bridges
• Railway Bridges
• Storm water and drainage culverts
• Buildings- Primarily industrial use
• Buildings such as sub stations, pumping stations etc.
• Miscellaneous buried structures required for infrastructure projects eg valve chambers etc.
• Foundations including spread footings, raft and piled foundations
• Earth retaining structures such as cantilever RC Walls, sheet pile walls, MSE Walls etc.
PRINCIPAL ACCOUNTABILITIES:
• Ensure projects undertaken in line with Mouchel policy on all SHEQ matters.
• Efficient delivery of the structural design for all roads, highways and infrastructure projects.
• Undertake continuous improvement and personal development, maintaining a detailed CPD register.
• Delivery of high quality design, demonstrating continuous improvement, to the measurable satisfaction of clients.
• Assist with value management, innovation and efficiency across the Structures team within the Design Centre
• Profitable completion of projects by completing assigned tasks within specified and agreed timescales.
• Assist with bidding activity as and when required.
• Work may require travel within GCC.
QUALIFICATION:
• A degree in a relevant discipline eg Structural Engineering or Civil Engineering with a structural bias.
• M.Sc in concrete or steel structures would be an advantage Or demonstrable experience.
• Experience of structural analysis packages such as MIDAS & LUSAS is essential.
KNOWLEDGE/EXPERIENCE:
• Minimum 5 years relevant similar experience.
• Sound knowledge and understanding of bridge and highway structure design standards and procedures.
• Proven track record in the delivery of structural projects from a design perspective Middle East experience is desirable.
TECHNICAL SKILLS/ABILITY:
• Good presentation, verbal and written communications skills Ability to work on own initiative on technical matters .
• In particular should have excellent knowledge of AASHTO LRFD Code.
Some knowledge of building design codes would also be an advantage – ACI 318, ASCE-7, UBC, EC2 Should have excellent knowledge of Excel, including writing of complex spreadsheets.
• Knowledge of MathCAD would also be an advantage.
• Should have extensive experience of using at least one of the following analysis packages: STAAD-Pro, LEAP, LUSAS, LEAP 2000.
• Experience of AutoCAD essential Experience of MS Office essential
Bridge Engineer
PURPOSE:
The Bridge Engineer is responsible for the maintenance, design and supervision of bridge and associated structures. The main duties of the Bridge Engineer is to prepare all maintenance, designs and drawings and assist in finalizing the quantities for all bridges and associated structures.
PRINCIPAL ACCOUNTABILITIES:
• To identify the need of the client and the need of the end users.
• Collect data needed for design as :(a).Location Plans (from Town Planning), if required(b).Results of the testing of the samples collected from the site under study.(c).Coloured photos.(d).Other data such as traffic volumes, loading etc. if required in coordination with Traffic Engineer and the client.
• Review data and prepare the draft maintenance design for Resident Engineer.
• Together with the Resident Engineer, meet the Engineer-in-charge from the client to discuss all the documents prepared and finalize the comments.
• Assist in preparing the design report.
• Review the final design again with Client Engineer if needed and assist in amending the final design report.
• After issuance of the Work Order, prepare five sets of the drawings for construction and distribute to the contractor, the client and the supervisory staff.
• To ensure the quality of the works during the construction stage by regular site visits and ensure compliance with drawings and specifications.
• To participate in handing over of the work orders.
• Assist RE in carrying out any correspondence needed with the client, the contractor and Government Departments (if needed).
• Assist in preparation of Monthly Reports in coordination with Resident Engineer and the project team.
• To study and/or visit the work order sites in order to resolve any queries raised by the supervision team.
QUALIFICATIONS:
• B.Sc in Civil Engineering.
• Should hold a professional engineer registration from Saudi Council of Engineers.
KNOWLEDGE/EXPERIENCE:
• Minimum 9 years experience, including 5 years in the supervision on execution bridges works.
• Knowledge, experience (and ability where applicable) of the following without supervision.
• Design codes (including AASHTO LRFT).
• Bridge design processes including an understanding of other associated disciplines.
• Contract documentation (specifications, conditions of contract, BoQ).
• Bridge analysis software (eg Sam-Leap).
• Commercial awareness.
• Production of technical drawings and reports.
• Experience working from concept to full design including preparation of tender documentation.
• Practical site experience .
• Dealing with clients budgets/legislation.
• Rounded knowledge of construction products, etc.
TECHNICAL SKILLS/ABILITIES:
• Ability to apply design codes.
• Perform calculations.
• Ability to produce sketches for production by others into engineering drawings.
• Coaching/mentoring skills.
• Supervisory skills.
• Self managing.
• Good communication skills.
Electrical Inspector
PURPOSE:
Supervision, monitoring and inspection of total construction activities carried out by contractor on site on behalf of employer in accordance with specification, approved drawings and method statements.
PRINCIPAL ACCOUNTABILITIES:
• Reviewing project contract documents and monitoring construction activities to ensure compliance.
• Monitoring and/or evaluating electrical tests such as ground-fault, ground resistance, insulation resistance, polarity, continuity, capacity, load and other electrical field tests as required.
• Exercising ability to interpret single-line and/or schematic electrical drawings as well as plans and specifications.
• Field checking installation and location of electrical equipment, electrical duct, conduit, cable, panels and other components of the electrical system being installed.
• Monitoring all electrical installations to assure circuitry phasing, equipment, and grounding adhere to construction documents and National Electric Code requirements.
• Verifying equipment settings, alignment, testing and energization requirements.
• Monitoring Contractors' compliance with approved Quality Control Plane.
• Providing general inspection on all Contractor and Sub-Contractor work to assure a safe and workman-like operation.
• Overseeing construction work in progress and assisting with contract compliance and work acceptance.
• Providing quality oversight.
QUALIFICATIONS:
• B.Sc in Electrical Engineering.
• Should hold a professional Engineer registration from Saudi Council of Engineers.
KNOWLEDGE/EXPERIENCE:
• Minimum 2 years experience in the supervision and implementation buildings construction works
• Site inspection of installation of electrical equipment preferably acting in an overseeing role.
• Familiarity with QA procedures for site works (risk assessments, method statements, materials approvals, inspection and testing plans, etc).
TECHNICAL SKILLS/ABILITIES:
• Work in a Team environment.
• Identify problems and seek solutions.
Civil Engineer
PURPOSE:
The purpose of this position is to provide general Civil Engineering support to the project team across all stages of the project.
PRINCIPAL ACCOUNTABILITIES:
• Undertake engineering design and documentation across a wide range of civil engineering projects based on established templates, produce specifications, design documentation and Tender documentation.
• Liaison with drafters and technical staff for drawing production.
• Checking of Drawings and Specifications.
• Carry out site inspections of construction work, and provide support to the Resident Engineer in Contract Administration and Construction Supervision.
• Longer term development of advanced skills and expertise in one or more areas of civil engineering carried out by the Division.
• Assistance in the preparation of reports and attendance of design progress meetings as required.
• Management of own workload and utilisation.
• Operating in accordance with the corporate health and safety, environment and quality standards.
QUALIFICATIONS:
• B.SC in Civil Engineering.
• Should hold a professional Engineer registration from Saudi Council of Engineers.
KNOWLEDGE/EXPERIENCE:
• Minimum 9 years, including 5 years in roads and bridges construction works.
• Previous design office experience desirable.
• Previous involvement in a selection of the following:
o Earthworks and Drainage
o Hydrology and hydraulic analyses
o Land Development
o Water Supply and Sewerage
o Pumping and Pipe Systems
o Roadworks
o Construction Supervision
o Contract Administration
o High level of general computer skills, e.g. Excel.
TECHNICAL SKILLS/ABILITIES:
• Demonstrated report writing skills of a high calibre.
• Excellent client relationship skills, demonstrated by referees.
• Excellent communication and team skills.
• Able to work to deadlines and under pressure.
• Good problem solving skills & creative thinking (innovation).
• Takes accountability for assigned work.
• Able to take initiative and to be self motivated .
• Takes accountability for assigned work.
Material Inspector
PURPOSE:
Supervision, monitoring and inspection of total construction activities carried out by contractor on site on behalf of employer in accordance with specification, approved drawings and method statements.
PRINCIPAL ACCOUNTABILITIES:
• To inspect and record the construction works carried out by contractor on site and resolve the site generated quarries by co-ordinating with the Resident Engineer.
• To ensure performance of the work in strict accordance with the drawings and specification.
• Supervision and Inspection of `additional works’ and `out of scope works’ carried out by contractor.
• Process the joint measurement forms and maintain the records of their status.
• Maintain records of completed works for interim and final payment and as-built plans
• Make special notes and document the contractors activities that may lead to claims.
• Be fair and firm in dealings with the contractor. Consider the alternatives and consequences carefully before making decisions.
• Check temperature, compaction, joints and surface of asphalt
• Check all form works, reinforcement etc before concrete pouring
• Co-ordinate and co-operate with Contractors site Foreman for all the activities.
• Adhere to safe working methods and report to the resident engineer for any accidents on site.
• Maintain a detailed diary of the day’s work activities, issues, work approved or rejected, hours of operation, labour and equipment used etc, and sign at the end of each day.
• Coordinate with the laboratory technician and arrange for sampling and testing of satisfactorily completed work and quality assurance testing of suspect materials.
• Checking the `Day work records’ submitted by contractor
• Supervision and Inspection of all construction activities carried out by contractor on site.
• Maintaining records of site resources, daily progress of work, inspections, construction and workshop drawings, method statements and ITPs (Inspector Testing Plans). Making special notes and document the contract activities that may lead to claims.
• Drafting site instructions for any required variations from, or additions to, the contract documents.
• Report questionable methods of operations by the contractor to the Engineer.
QUALIFICATIONS:
• B.Sc in civil engineering/ B.Sc of Science( department of Geology or Chemistry).
KNOWLEDGE/EXPERIENCE:
• Minimum 2 years experience in supervision and implementation on roads and bridges construction works, including 1 years in all roads and bridges materials tests or BSC in Geology( department of Geology or Chemistry) with experience of not less than 3 years, including 1 years in application of mechanical soil and design of concrete and asphalt admixtures.
• Finalise acceptance criteria of the quality of work.
• Planning and resource allocation.
• Knowledge of inspection test plans and procedures.
• Work experience with consultants for Inspection of total construction activities on site.
• Knowledge of sampling and testing of construction materials.
TECHNICAL SKILLS AND ABILITIES:
• Skills in conflict management (e.g site generated conflicts).
• Use of computer Languages – Microsoft office and Auto Cad.
• Driving license (experience) will be beneficial.
Mechanical Inspector
PURPOSE:
Supervision, monitoring and inspection of total construction activities carried out by contractor on site on behalf of employer in accordance with specification, approved drawings and method statements.
PRINCIPAL ACCOUNTABILITIES:
• Inspect pipelines, pressure, gravity pipes.
• Background to codes and regulations for pipelines, pressure tests and gravity tests.
• Well versed in cooling loads.
• Procedures with Inspection Requests.
• Technical reports to line manager.
• Codes and Quality regulations.
• To inspect and record the construction works carried out by contractor on site and resolve the site. Generated quarries by co-ordinating with Asst. Resident Engineer.
• To ensure performance of the work in strict accordance with the drawings and specification.
• Supervision and Inspection of `additional works’ and `out of scope works’ carried out by contractor.
• Checking the `Day work records’ submitted by contractor.
• Supervision and Inspection of all construction activities carried out by contractor on site.
• Maintaining records of site resources, daily progress of work, inspections, construction and workshop. drawings, method statements and ITPs (Inspector Testing Plans). Making special notes and document the contract activities that may lead to claims.
• Drafting site instructions for any required variations from, or additions to, the contract documents.
• Report questionable methods of operations by the contractor to the Engineer.
QUALIFICATIONS:
• B.Sc in mechanical Engineering.
KNOWLEDGE/EXPERIENCE:
• Minimum 2 years in the supervision and implementation buildings construction works.
• Finalise acceptance criteria of the quality of work.
• Planning and resource allocation.
• Knowledge of inspection test plans and procedures.
• Thorough knowledge of the company’s Quality, Health & Safety policy.
• Work experience with consultants for Inspection of total construction activities on site.
• Knowledge of sampling and testing of construction materials.
TECHNICAL SKILLS/ABILITIES:
• Skills in conflict management (eg site generated conflicts).
• Use of computer Languages – Autocad, construction issued drawings, difference between design drawings and shop drawings.
• Driving license (experience) will be beneficial.
Quantity Surveyor
PURPOSE:
To assist the CM in the provision of quantity surveying services as part of the site team. The Quantity Surveyor is charged with the responsibility of correlating information relating to all financial aspects of the project.
PRINCIPAL ACCOUNTABILITIES:
• Should be aware of all financial matters and proper maintaining of quantity books and shall advise the CM regarding all financial matters.
• Should have a thorough knowledge of the procedures and instructions.
• Should be involved with the quantity taking for the design works as per the directions of the CM and the final design drawings of each design order, preparation of Bills of Quantities as per the Contract Documents.
• Concerned with the measurement of works carried out in accordance with the specification
• Should check that the works are to the specific grades and levels, organise files to include: (a). Records are kept and updated of work in progress.(b). Contractors requests are checked for accuracy(c). Calculations relating to payments are checked and in particular accurate records of completed works are maintained.
• Prepare a BOQ Recapitulation
• Prepare Monthly Financial Report.
• Prepare and maintain final quantity books.
• Check the contractors final pay certificates
• Evaluate unit rates for new terms of work.
• Check joint measurements for payments.
• Compare final pay quantities.
• Maintain current as built drawings as the work progresses.
• Maintain the progress schedule and cash flow chart.
• Assist in preparation of Change Orders/Variation Orders.
• Assist in evaluation claims.
• Give prompt attention to and accurate recording of Contractors requests received.
• Check cross sections for earthworks submitted by the Contractor.
• Liaise with the clients QS to ensure that the methods used in calculating final quantities are acceptable.
• Check all calculations submitted by the contractors QS relating to valuations and in particular to keep accurate records of completed works.
• Prepare and submit reports of a technical nature when called up on by the CM.
QUALIFICATIONS:
• B.SC in Civil Engineering or B.SC in Surveying Engineering.
KNOWLEDGE/EXPERIENCE:
• Minimum 15 years in estimating and calculating the quantities for roads infrastructure projects.
• Good civil engineering experience.
• Some Middle Eastern working experience.
• Knowledge of Highways contracts.
• Resilient, hard working and willing to work as part of a team.
TECHNICAL SKILLS/ABILITIES:
• Knowledge of ICE/FIDIC or other standard forms of construction contract.
• Good knowledge of civil engineering works and general contract procedures.
• Ability to work under own initiative and lead QS teams at site.
• To develop skills of subordinate staff.
• To report to Line Manager on all issues relating to the management of staff under his control.
Resident Engineer
PURPOSE:
The Resident Engineer is responsible for the activities and efficiency of the site staff for the satisfactory persecution of the work under supervision. You have the responsibility to build and maintain an organization that can effectively provide the necessary staking, testing, and inspection to ensure the project is constructed according to the plans and specifications. The Resident Engineer should be familiar with the plans, specifications, and any Contract amendments to effectively administer the work.The executive side concerns the follow up of day-to-day working requests, laboratory tests, visiting the site to ensure the performance of site staff.
PRINCIPAL ACCOUNTABILITIES:
• Ensure Contractor’s compliance with the Contract Documents.
• Inspect all workmanship and materials.
• Coordinate the supply of vertical and horizontal controls for the Contractor
• Make layout checks on lines and grades.
• Maintain all file records on designated forms. These records include all reports on work force, equipment, progress, safety, etc.
• Review and approve the Contractor’s shop drawings.
• Locate execute, and interpret all soils and materials testing according to the provisions in the Contract Documents and Standard Specifications.
• The Resident Engineer is responsible for Contract enforcement and is not to relieve the Contractor of their responsibilities without client authorisation.
• Check and certify progress payments to the Contractor.
• Check personnel, equipment, and material costs for all Variation Orders and change orders required under the terms of the Contract.
• Review requests for additional compensation and time extensions.
• Site safety monitoring wherein the monitoring activities, meetings, reviews, safety violations, rectification measures, and accident reports are included in the Monthly Progress Report.
• When necessary, determine proper costs of additions or credits due to the client and recommend appropriate action.
• Inspect safety conditions and inform the Contractor of construction safety violations and follow up action to be taken.
• Attend all meetings, and prepare written minutes for distribution
• Review update, monitor, and report on the Contractor’s work schedules, CPM-chart, and Cash flow Status.
• Monitor and report on progress of scheduled utility relocation work.
• Provide all photographs before, during, after construction necessary to provide adequate documentation of changes in site and adjacent structures.
• Review and approve the contractor’s plans for protection of existing buildings and structures.
• To keep in order all the site filling as per approved systems and practices.
• To issue Site Instructions to the Contractor.
• Check the quantities and payments to the Contractor
• To manage the supervision site staff.
• To coordinate and co-operate with the project engineers assigned to different areas by the contractor.
• To coordinate and co-operate with the liaison engineer from the Client.
• To meet the site supervision staff periodically
• To liaise with the laboratory technicians in the absence of the Materials Engineer.
QUALIFICATIONS:
• B.Sc in civil engineering.
• Should hold a professional Engineer registration from Saudi Council of Engineers.
KNOWLEDGE/EXPERIENCE:
• Minimum 15 years experience supervision and implementation, including 10 years in roads and bridges construction works.
TECHNICAL SKILLS/ABILITIES:
• Experience in using Power Tools for Windows (PTW).
• Good computer skills, e.g. Excel.
• Knowledge of UK Standards.
• Demonstrated report writing skills of a high calibre.
• Excellent client relationship skills, demonstrated by referees.
• Excellent communication and team skills Ability to work as part of a team.
• Able to work to deadlines and under pressure.
• Good problem solving skills & creative thinking (innovation) .
• Takes accountability for assigned work.
Site Inspector
PURPOSE:
Supervision, monitoring and inspection of total construction activities carried out by contractor on site on behalf of employer in accordance with specification, approved drawings and method statements.
PRINCIPAL ACCOUNTABILITIES:
• To inspect and record the construction works carried out by contractor on site and resolve the site generated quarries by co-ordinating with the Resident Engineer.
• To ensure performance of the work in strict accordance with the drawings and specification.
• Supervision and Inspection of `additional works’ and `out of scope works’ carried out by contractor.
• Process the joint measurement forms and maintain the records of their status.
• Maintain records of completed works for interim and final payment and as-built plans
• Make special notes and document the contractors activities that may lead to claims.
• Be fair and firm in dealings with the contractor. Consider the alternatives and consequences carefully before making decisions.
• Check temperature, compaction, joints and surface of asphalt
• Check all form works, reinforcement etc before concrete pouring
• Co-ordinate and co-operate with Contractors site Foreman for all the activities.
• Adhere to safe working methods and report to the resident engineer for any accidents on site.
• Maintain a detailed diary of the day’s work activities, issues, work approved or rejected, hours of operation, labour and equipment used etc, and sign at the end of each day.
• Coordinate with the laboratory technician and arrange for sampling and testing of satisfactorily completed work and quality assurance testing of suspect materials.
• Checking the `Day work records’ submitted by contractor
• Supervision and Inspection of all construction activities carried out by contractor on site.
• Maintaining records of site resources, daily progress of work, inspections, construction and workshop drawings, method statements and ITPs (Inspector Testing Plans). Making special notes and document the contract activities that may lead to claims.
• Drafting site instructions for any required variations from, or additions to, the contract documents.
• Report questionable methods of operations by the contractor to the Engineer.
QUALIFICATION:
• B.Sc in civil engineering.
• Holds a Engineer degree from Saudi Council of Engineers.
KNOWLEDGE/EXPERIENCE:
• Minimum 2 years in the supervision and implementation on roads and bridges.
• Finalise acceptance criteria of the quality of work.
• Planning and resource allocation.
• Knowledge of inspection test plans and procedures.
• Work experience with consultants for Inspection of total construction activities on site.
• Knowledge of sampling and testing of construction materials.
TECHNICAL SKILLS/ABILITY:
• Skills in conflict management (eg site generated conflicts).
• Use of computer Languages – Microsoft office and Auto Cad.
• Driving license (experience) will be beneficial.
Surveyor
PURPOSE:
The Surveyor is assigned to supervise and check the setting out of the works on the project. He is to report directly to the engineer in charge of the relevant section of work on the project.
PRINCIPAL ACCOUNTABILITIES:
• Perform survey works under the direction and guidance of the Engineer in charge.
• Check Contractor’s establishment of the primary horizontal and vertical control points including reference points and reference ties for re-establishing the points in the field.
• Supervise the Contractors surveying staff.
• Record discrepancies or technical problems to the Engineer in charge.
• Coordinate with the Contractor’s Surveyors on work priorities and schedule.
• With the Contractor perform joint measurements of the completed work for payments purposes, as directed by the QS via the Engineer.
• Check completed work for conformance to the line and grade required by the project plans in coordination with the inspector assigned in the work.
• Perform regular checks of the Contractor setting out to verify proper execution and accuracy.
• Maintain equipment in proper condition and perform frequent calibration checks.
• Review and comment appropriately to RFA’s as received from the contractor, when directed by the Engineer.
• Review and comment appropriately to shop drawings received from the Contractor, when directed by the Engineer.
• Ensure that the works are being constructed to the latest construction and shop drawings.
• Record all measurements and calculations etc neatly and accurately in field books as the work progress.
QUALIFICATIONS:
• B.Sc in civil engineering or B.Sc in surveying engineering.
• Should hold an Engineer registration from Saudi Council of Engineers.
Experience/Knowledge:
• Minimum 2 years in survey works for roads and bridges.
• Comprehensive knowledge of planning and environmental regulations and health and safety.
• Knowledge of surveying technology and CAD programs.
• Experience on procedures and work sequence.
• Experience in information management (how it get inputs and how to produce outputs).
• Good IT and numerical Skills particularly databases.
TECHNICAL SKILLS/ABILITIES:
• Effective Time management skills.
• Good communication skills (verbal and written).
• Team work.
• Priorities management skills.
• Strong analytical skills.
• Creative approach to Problems solving.
• Documentation management.
• Proactive and Self Motivated.
• Customer Focus- engages in building sound relationships with the customer project team.
Traffic & Safety Engineer
PURPOSE:
Set out detailed methodology for traffic surveys and traffic studies scheme; such methodology will be submitted to the client for review and approval before commencing traffic activities.
PRINCIPAL ACCOUNTABILITIES:
• Collect data resulted from previous traffic studies including traffic counts, traffic composition and public transport.
• To conduct classified traffic survey to better define failure causes, if needed.
• To guide traffic survey team I order to collect consistent traffic data required to define ideal solutions for the ease of traffic.
• To determine traffic survey count stations.
• To conduct traffic circulation study.
• To conduct traffic control devices study in order to improve adequacy and functions of signs, signals, road marking etc.
• To verify and assess traffic growth rates of previous studies.
• To estimate the design year traffic based on traffic forecasts for design purposes.
• To identify design year traffic characteristics, composition and loading of traffic for the reference of the design team.
• To conduct parking supply and demand study for selected area when requested by the client.
• To consult and take advise from the client Traffic Engineer to reach to more consistent results and to apply up-to-date solution in solving traffic problems, advise and consult traffic engineers of the world-wide consultant offices for more consistent results
• To keep client updated regarding new traffic control techniques and device etc applied around the entire world.
QUALIFICATIONS:
• B.Sc in civil engineering.
• Holds a Participant Engineer registration from Saudi Council of Engineers.
KNOWLEDGE/EXPERIENCE:
• Minimum 5 years, including 2 years in roads traffic and safety engineering.
TECHNICAL SKILLS/ABILITIES:
• Ability to design traffic and transportation projects including but not limited to CRISP study, bus priority, parking, traffic calming, and accident study.
• Communicate effectively both written and verbally with clients and other stakeholders.
• Use traffic and transportation design software – Use of CAD will be an advantage.
• Should have basic knowledge of MS project.
Electrical Engineer
PURPOSE:
The Electrical Engineer is responsible for the design and supervision of electrical works. You shall design electrical works as per the requirements of both the client and the end user keeping the prevailing standards and specifications in mind. You should have the thorough knowledge of the latest client qualifications. You shall organize and keep all relevant design documents in accordance with the consulting system for the case of reference at all time.
PRINCIPAL ACCOUNTABILITIES:
• To keep all relevant design standards in order which are to be used at all time for all designs.
• Check the Shop Drawings submitted by the Contractor for compliance with contract standards and specifications.
• Liaison with client and other service authorities during design and execution stages.
• Correspondence with client, contractor and other service authorities
• Check and evaluate Material Submittals of electrical terms submitted by the contractor for construction purposes.
• Study and analyze contractor rate analysis for new electrical items (non B.O.Q) and make necessary recommendations to the client accordingly.
• Inspect electrical materials supplied on site.
• Assist and advise the Resident Engineer during their study of claims, variations raised by contractor for extension of time or extra cost regarding delayed electrical works and verify justifications and basis of contractor claims.
• Attend follow up meetings with the Client Electrical Engineer (if applicable).
• To ensure that quality control of contractor’s works is maintained at all time to the satisfaction of the client and the end user.
• Prepare cost estimate for electrical works for proposed work order.
• Advise and guide the contractor technically to solve any problems that may arise during execution of work.
QUALIFICATIONS:
• B.Sc in Electrical Engineering.
• Should hold a professional Engineer registration from Saudi Council of Engineers.
KNOWLEDGE/EXPERIENCE:
• Minimum 9 years experience in street lighting and the extension of networks.
TECHNICAL SKILLS/ABILITIES:
• Good computer skills, e.g. Excel, MS Word etc.
• Knowledge of UK Electrical Standards.
• Demonstrated report writing skills of a high calibre.
• Excellent client relationship skills, demonstrated by referees.
• Excellent communication and team skills Ability to work as part of a team.
• Able to work to deadlines and under pressure.
• Good problem solving skills & creative thinking (innovation).
• Takes accountability for assigned work.
Document Controller
PURPOSE:
Assist with the smooth running of the office by ensuring that all designated tasks are completed on time.
PRINCIPAL ACCOUNTABILITIES:
• Understand the importance of timeliness to internal and external clients. Achieve reliability and credibility in regard to meeting deadlines.
• Ensure that all work is performed in accordance with the QA System.
• Ensure that confidentiality is maintained at all times.
• Assisting the Administration team with secretarial and any other administrative duties.
• Liaison with team members, clients and general staff.
• Any other duties as reasonably required.
• Receiving and proper distribution of incoming correspondences
• Letter formatting for the team.
• Assembling of documents that must be transmitted to other parties (eg client, contractors, subcontractors etc)
• Scan all received and sent documents in PDF to be uploaded in Mouchel Collaborator
• Proper registration of all incoming/outgoing documents.
• Correspondence filing.
• Segregation of letters according to Project names
• Reproduction of documents.
• Printing of tenders, attachments and other administrative requests from Engineers.
QUALIFICATIONS:
• University degree in Business Administration.
KNOWLEDGE/EXPERIENCE:
• Minimum 5 years of experience.
TECHNICAL SKILLS/ABILITIES:
• Proficiency in Ms Applications.
• Professional attitude, good interpersonal skills.
• Articulate and confident phone manner.
• Accuracy.
• Ability to listen, clarify, understand and efficiently follow directions.
• Ability to prioritise tasks and coordinate others to ensure deadlines are achieved.
• Willingness to learn from others and improve.
• Enthusiastic attitude and responsiveness to direction from Administration Manager.
• Punctual, neat and tidy.
http://www.mouchel.com
Email: munadel.ibrahim@mouchel.
Engineer-Structures
PURPOSE:
To undertake services within an engineering environment which may include (but not limited to); scheme investigation, site inspections, data collection and analysis, concept, preliminary and detailed design, reports, NOCs, Specifications & BoQs, works/construction inspection and supervision to progress scheme design, development and construction.
The Engineer will be responsible for the following:
• Highway Bridges
• Railway Bridges
• Storm water and drainage culverts
• Buildings- Primarily industrial use
• Buildings such as sub stations, pumping stations etc.
• Miscellaneous buried structures required for infrastructure projects eg valve chambers etc.
• Foundations including spread footings, raft and piled foundations
• Earth retaining structures such as cantilever RC Walls, sheet pile walls, MSE Walls etc.
PRINCIPAL ACCOUNTABILITIES:
• Ensure projects undertaken in line with Mouchel policy on all SHEQ matters.
• Efficient delivery of the structural design for all roads, highways and infrastructure projects.
• Undertake continuous improvement and personal development, maintaining a detailed CPD register.
• Delivery of high quality design, demonstrating continuous improvement, to the measurable satisfaction of clients.
• Assist with value management, innovation and efficiency across the Structures team within the Design Centre
• Profitable completion of projects by completing assigned tasks within specified and agreed timescales.
• Assist with bidding activity as and when required.
• Work may require travel within GCC.
QUALIFICATION:
• A degree in a relevant discipline eg Structural Engineering or Civil Engineering with a structural bias.
• M.Sc in concrete or steel structures would be an advantage Or demonstrable experience.
• Experience of structural analysis packages such as MIDAS & LUSAS is essential.
KNOWLEDGE/EXPERIENCE:
• Minimum 5 years relevant similar experience.
• Sound knowledge and understanding of bridge and highway structure design standards and procedures.
• Proven track record in the delivery of structural projects from a design perspective Middle East experience is desirable.
TECHNICAL SKILLS/ABILITY:
• Good presentation, verbal and written communications skills Ability to work on own initiative on technical matters .
• In particular should have excellent knowledge of AASHTO LRFD Code.
Some knowledge of building design codes would also be an advantage – ACI 318, ASCE-7, UBC, EC2 Should have excellent knowledge of Excel, including writing of complex spreadsheets.
• Knowledge of MathCAD would also be an advantage.
• Should have extensive experience of using at least one of the following analysis packages: STAAD-Pro, LEAP, LUSAS, LEAP 2000.
• Experience of AutoCAD essential Experience of MS Office essential
Bridge Engineer
PURPOSE:
The Bridge Engineer is responsible for the maintenance, design and supervision of bridge and associated structures. The main duties of the Bridge Engineer is to prepare all maintenance, designs and drawings and assist in finalizing the quantities for all bridges and associated structures.
PRINCIPAL ACCOUNTABILITIES:
• To identify the need of the client and the need of the end users.
• Collect data needed for design as :(a).Location Plans (from Town Planning), if required(b).Results of the testing of the samples collected from the site under study.(c).Coloured photos.(d).Other data such as traffic volumes, loading etc. if required in coordination with Traffic Engineer and the client.
• Review data and prepare the draft maintenance design for Resident Engineer.
• Together with the Resident Engineer, meet the Engineer-in-charge from the client to discuss all the documents prepared and finalize the comments.
• Assist in preparing the design report.
• Review the final design again with Client Engineer if needed and assist in amending the final design report.
• After issuance of the Work Order, prepare five sets of the drawings for construction and distribute to the contractor, the client and the supervisory staff.
• To ensure the quality of the works during the construction stage by regular site visits and ensure compliance with drawings and specifications.
• To participate in handing over of the work orders.
• Assist RE in carrying out any correspondence needed with the client, the contractor and Government Departments (if needed).
• Assist in preparation of Monthly Reports in coordination with Resident Engineer and the project team.
• To study and/or visit the work order sites in order to resolve any queries raised by the supervision team.
QUALIFICATIONS:
• B.Sc in Civil Engineering.
• Should hold a professional engineer registration from Saudi Council of Engineers.
KNOWLEDGE/EXPERIENCE:
• Minimum 9 years experience, including 5 years in the supervision on execution bridges works.
• Knowledge, experience (and ability where applicable) of the following without supervision.
• Design codes (including AASHTO LRFT).
• Bridge design processes including an understanding of other associated disciplines.
• Contract documentation (specifications, conditions of contract, BoQ).
• Bridge analysis software (eg Sam-Leap).
• Commercial awareness.
• Production of technical drawings and reports.
• Experience working from concept to full design including preparation of tender documentation.
• Practical site experience .
• Dealing with clients budgets/legislation.
• Rounded knowledge of construction products, etc.
TECHNICAL SKILLS/ABILITIES:
• Ability to apply design codes.
• Perform calculations.
• Ability to produce sketches for production by others into engineering drawings.
• Coaching/mentoring skills.
• Supervisory skills.
• Self managing.
• Good communication skills.
Electrical Inspector
PURPOSE:
Supervision, monitoring and inspection of total construction activities carried out by contractor on site on behalf of employer in accordance with specification, approved drawings and method statements.
PRINCIPAL ACCOUNTABILITIES:
• Reviewing project contract documents and monitoring construction activities to ensure compliance.
• Monitoring and/or evaluating electrical tests such as ground-fault, ground resistance, insulation resistance, polarity, continuity, capacity, load and other electrical field tests as required.
• Exercising ability to interpret single-line and/or schematic electrical drawings as well as plans and specifications.
• Field checking installation and location of electrical equipment, electrical duct, conduit, cable, panels and other components of the electrical system being installed.
• Monitoring all electrical installations to assure circuitry phasing, equipment, and grounding adhere to construction documents and National Electric Code requirements.
• Verifying equipment settings, alignment, testing and energization requirements.
• Monitoring Contractors' compliance with approved Quality Control Plane.
• Providing general inspection on all Contractor and Sub-Contractor work to assure a safe and workman-like operation.
• Overseeing construction work in progress and assisting with contract compliance and work acceptance.
• Providing quality oversight.
QUALIFICATIONS:
• B.Sc in Electrical Engineering.
• Should hold a professional Engineer registration from Saudi Council of Engineers.
KNOWLEDGE/EXPERIENCE:
• Minimum 2 years experience in the supervision and implementation buildings construction works
• Site inspection of installation of electrical equipment preferably acting in an overseeing role.
• Familiarity with QA procedures for site works (risk assessments, method statements, materials approvals, inspection and testing plans, etc).
TECHNICAL SKILLS/ABILITIES:
• Work in a Team environment.
• Identify problems and seek solutions.
Civil Engineer
PURPOSE:
The purpose of this position is to provide general Civil Engineering support to the project team across all stages of the project.
PRINCIPAL ACCOUNTABILITIES:
• Undertake engineering design and documentation across a wide range of civil engineering projects based on established templates, produce specifications, design documentation and Tender documentation.
• Liaison with drafters and technical staff for drawing production.
• Checking of Drawings and Specifications.
• Carry out site inspections of construction work, and provide support to the Resident Engineer in Contract Administration and Construction Supervision.
• Longer term development of advanced skills and expertise in one or more areas of civil engineering carried out by the Division.
• Assistance in the preparation of reports and attendance of design progress meetings as required.
• Management of own workload and utilisation.
• Operating in accordance with the corporate health and safety, environment and quality standards.
QUALIFICATIONS:
• B.SC in Civil Engineering.
• Should hold a professional Engineer registration from Saudi Council of Engineers.
KNOWLEDGE/EXPERIENCE:
• Minimum 9 years, including 5 years in roads and bridges construction works.
• Previous design office experience desirable.
• Previous involvement in a selection of the following:
o Earthworks and Drainage
o Hydrology and hydraulic analyses
o Land Development
o Water Supply and Sewerage
o Pumping and Pipe Systems
o Roadworks
o Construction Supervision
o Contract Administration
o High level of general computer skills, e.g. Excel.
TECHNICAL SKILLS/ABILITIES:
• Demonstrated report writing skills of a high calibre.
• Excellent client relationship skills, demonstrated by referees.
• Excellent communication and team skills.
• Able to work to deadlines and under pressure.
• Good problem solving skills & creative thinking (innovation).
• Takes accountability for assigned work.
• Able to take initiative and to be self motivated .
• Takes accountability for assigned work.
Material Inspector
PURPOSE:
Supervision, monitoring and inspection of total construction activities carried out by contractor on site on behalf of employer in accordance with specification, approved drawings and method statements.
PRINCIPAL ACCOUNTABILITIES:
• To inspect and record the construction works carried out by contractor on site and resolve the site generated quarries by co-ordinating with the Resident Engineer.
• To ensure performance of the work in strict accordance with the drawings and specification.
• Supervision and Inspection of `additional works’ and `out of scope works’ carried out by contractor.
• Process the joint measurement forms and maintain the records of their status.
• Maintain records of completed works for interim and final payment and as-built plans
• Make special notes and document the contractors activities that may lead to claims.
• Be fair and firm in dealings with the contractor. Consider the alternatives and consequences carefully before making decisions.
• Check temperature, compaction, joints and surface of asphalt
• Check all form works, reinforcement etc before concrete pouring
• Co-ordinate and co-operate with Contractors site Foreman for all the activities.
• Adhere to safe working methods and report to the resident engineer for any accidents on site.
• Maintain a detailed diary of the day’s work activities, issues, work approved or rejected, hours of operation, labour and equipment used etc, and sign at the end of each day.
• Coordinate with the laboratory technician and arrange for sampling and testing of satisfactorily completed work and quality assurance testing of suspect materials.
• Checking the `Day work records’ submitted by contractor
• Supervision and Inspection of all construction activities carried out by contractor on site.
• Maintaining records of site resources, daily progress of work, inspections, construction and workshop drawings, method statements and ITPs (Inspector Testing Plans). Making special notes and document the contract activities that may lead to claims.
• Drafting site instructions for any required variations from, or additions to, the contract documents.
• Report questionable methods of operations by the contractor to the Engineer.
QUALIFICATIONS:
• B.Sc in civil engineering/ B.Sc of Science( department of Geology or Chemistry).
KNOWLEDGE/EXPERIENCE:
• Minimum 2 years experience in supervision and implementation on roads and bridges construction works, including 1 years in all roads and bridges materials tests or BSC in Geology( department of Geology or Chemistry) with experience of not less than 3 years, including 1 years in application of mechanical soil and design of concrete and asphalt admixtures.
• Finalise acceptance criteria of the quality of work.
• Planning and resource allocation.
• Knowledge of inspection test plans and procedures.
• Work experience with consultants for Inspection of total construction activities on site.
• Knowledge of sampling and testing of construction materials.
TECHNICAL SKILLS AND ABILITIES:
• Skills in conflict management (e.g site generated conflicts).
• Use of computer Languages – Microsoft office and Auto Cad.
• Driving license (experience) will be beneficial.
Mechanical Inspector
PURPOSE:
Supervision, monitoring and inspection of total construction activities carried out by contractor on site on behalf of employer in accordance with specification, approved drawings and method statements.
PRINCIPAL ACCOUNTABILITIES:
• Inspect pipelines, pressure, gravity pipes.
• Background to codes and regulations for pipelines, pressure tests and gravity tests.
• Well versed in cooling loads.
• Procedures with Inspection Requests.
• Technical reports to line manager.
• Codes and Quality regulations.
• To inspect and record the construction works carried out by contractor on site and resolve the site. Generated quarries by co-ordinating with Asst. Resident Engineer.
• To ensure performance of the work in strict accordance with the drawings and specification.
• Supervision and Inspection of `additional works’ and `out of scope works’ carried out by contractor.
• Checking the `Day work records’ submitted by contractor.
• Supervision and Inspection of all construction activities carried out by contractor on site.
• Maintaining records of site resources, daily progress of work, inspections, construction and workshop. drawings, method statements and ITPs (Inspector Testing Plans). Making special notes and document the contract activities that may lead to claims.
• Drafting site instructions for any required variations from, or additions to, the contract documents.
• Report questionable methods of operations by the contractor to the Engineer.
QUALIFICATIONS:
• B.Sc in mechanical Engineering.
KNOWLEDGE/EXPERIENCE:
• Minimum 2 years in the supervision and implementation buildings construction works.
• Finalise acceptance criteria of the quality of work.
• Planning and resource allocation.
• Knowledge of inspection test plans and procedures.
• Thorough knowledge of the company’s Quality, Health & Safety policy.
• Work experience with consultants for Inspection of total construction activities on site.
• Knowledge of sampling and testing of construction materials.
TECHNICAL SKILLS/ABILITIES:
• Skills in conflict management (eg site generated conflicts).
• Use of computer Languages – Autocad, construction issued drawings, difference between design drawings and shop drawings.
• Driving license (experience) will be beneficial.
Quantity Surveyor
PURPOSE:
To assist the CM in the provision of quantity surveying services as part of the site team. The Quantity Surveyor is charged with the responsibility of correlating information relating to all financial aspects of the project.
PRINCIPAL ACCOUNTABILITIES:
• Should be aware of all financial matters and proper maintaining of quantity books and shall advise the CM regarding all financial matters.
• Should have a thorough knowledge of the procedures and instructions.
• Should be involved with the quantity taking for the design works as per the directions of the CM and the final design drawings of each design order, preparation of Bills of Quantities as per the Contract Documents.
• Concerned with the measurement of works carried out in accordance with the specification
• Should check that the works are to the specific grades and levels, organise files to include: (a). Records are kept and updated of work in progress.(b). Contractors requests are checked for accuracy(c). Calculations relating to payments are checked and in particular accurate records of completed works are maintained.
• Prepare a BOQ Recapitulation
• Prepare Monthly Financial Report.
• Prepare and maintain final quantity books.
• Check the contractors final pay certificates
• Evaluate unit rates for new terms of work.
• Check joint measurements for payments.
• Compare final pay quantities.
• Maintain current as built drawings as the work progresses.
• Maintain the progress schedule and cash flow chart.
• Assist in preparation of Change Orders/Variation Orders.
• Assist in evaluation claims.
• Give prompt attention to and accurate recording of Contractors requests received.
• Check cross sections for earthworks submitted by the Contractor.
• Liaise with the clients QS to ensure that the methods used in calculating final quantities are acceptable.
• Check all calculations submitted by the contractors QS relating to valuations and in particular to keep accurate records of completed works.
• Prepare and submit reports of a technical nature when called up on by the CM.
QUALIFICATIONS:
• B.SC in Civil Engineering or B.SC in Surveying Engineering.
KNOWLEDGE/EXPERIENCE:
• Minimum 15 years in estimating and calculating the quantities for roads infrastructure projects.
• Good civil engineering experience.
• Some Middle Eastern working experience.
• Knowledge of Highways contracts.
• Resilient, hard working and willing to work as part of a team.
TECHNICAL SKILLS/ABILITIES:
• Knowledge of ICE/FIDIC or other standard forms of construction contract.
• Good knowledge of civil engineering works and general contract procedures.
• Ability to work under own initiative and lead QS teams at site.
• To develop skills of subordinate staff.
• To report to Line Manager on all issues relating to the management of staff under his control.
Resident Engineer
PURPOSE:
The Resident Engineer is responsible for the activities and efficiency of the site staff for the satisfactory persecution of the work under supervision. You have the responsibility to build and maintain an organization that can effectively provide the necessary staking, testing, and inspection to ensure the project is constructed according to the plans and specifications. The Resident Engineer should be familiar with the plans, specifications, and any Contract amendments to effectively administer the work.The executive side concerns the follow up of day-to-day working requests, laboratory tests, visiting the site to ensure the performance of site staff.
PRINCIPAL ACCOUNTABILITIES:
• Ensure Contractor’s compliance with the Contract Documents.
• Inspect all workmanship and materials.
• Coordinate the supply of vertical and horizontal controls for the Contractor
• Make layout checks on lines and grades.
• Maintain all file records on designated forms. These records include all reports on work force, equipment, progress, safety, etc.
• Review and approve the Contractor’s shop drawings.
• Locate execute, and interpret all soils and materials testing according to the provisions in the Contract Documents and Standard Specifications.
• The Resident Engineer is responsible for Contract enforcement and is not to relieve the Contractor of their responsibilities without client authorisation.
• Check and certify progress payments to the Contractor.
• Check personnel, equipment, and material costs for all Variation Orders and change orders required under the terms of the Contract.
• Review requests for additional compensation and time extensions.
• Site safety monitoring wherein the monitoring activities, meetings, reviews, safety violations, rectification measures, and accident reports are included in the Monthly Progress Report.
• When necessary, determine proper costs of additions or credits due to the client and recommend appropriate action.
• Inspect safety conditions and inform the Contractor of construction safety violations and follow up action to be taken.
• Attend all meetings, and prepare written minutes for distribution
• Review update, monitor, and report on the Contractor’s work schedules, CPM-chart, and Cash flow Status.
• Monitor and report on progress of scheduled utility relocation work.
• Provide all photographs before, during, after construction necessary to provide adequate documentation of changes in site and adjacent structures.
• Review and approve the contractor’s plans for protection of existing buildings and structures.
• To keep in order all the site filling as per approved systems and practices.
• To issue Site Instructions to the Contractor.
• Check the quantities and payments to the Contractor
• To manage the supervision site staff.
• To coordinate and co-operate with the project engineers assigned to different areas by the contractor.
• To coordinate and co-operate with the liaison engineer from the Client.
• To meet the site supervision staff periodically
• To liaise with the laboratory technicians in the absence of the Materials Engineer.
QUALIFICATIONS:
• B.Sc in civil engineering.
• Should hold a professional Engineer registration from Saudi Council of Engineers.
KNOWLEDGE/EXPERIENCE:
• Minimum 15 years experience supervision and implementation, including 10 years in roads and bridges construction works.
TECHNICAL SKILLS/ABILITIES:
• Experience in using Power Tools for Windows (PTW).
• Good computer skills, e.g. Excel.
• Knowledge of UK Standards.
• Demonstrated report writing skills of a high calibre.
• Excellent client relationship skills, demonstrated by referees.
• Excellent communication and team skills Ability to work as part of a team.
• Able to work to deadlines and under pressure.
• Good problem solving skills & creative thinking (innovation) .
• Takes accountability for assigned work.
Site Inspector
PURPOSE:
Supervision, monitoring and inspection of total construction activities carried out by contractor on site on behalf of employer in accordance with specification, approved drawings and method statements.
PRINCIPAL ACCOUNTABILITIES:
• To inspect and record the construction works carried out by contractor on site and resolve the site generated quarries by co-ordinating with the Resident Engineer.
• To ensure performance of the work in strict accordance with the drawings and specification.
• Supervision and Inspection of `additional works’ and `out of scope works’ carried out by contractor.
• Process the joint measurement forms and maintain the records of their status.
• Maintain records of completed works for interim and final payment and as-built plans
• Make special notes and document the contractors activities that may lead to claims.
• Be fair and firm in dealings with the contractor. Consider the alternatives and consequences carefully before making decisions.
• Check temperature, compaction, joints and surface of asphalt
• Check all form works, reinforcement etc before concrete pouring
• Co-ordinate and co-operate with Contractors site Foreman for all the activities.
• Adhere to safe working methods and report to the resident engineer for any accidents on site.
• Maintain a detailed diary of the day’s work activities, issues, work approved or rejected, hours of operation, labour and equipment used etc, and sign at the end of each day.
• Coordinate with the laboratory technician and arrange for sampling and testing of satisfactorily completed work and quality assurance testing of suspect materials.
• Checking the `Day work records’ submitted by contractor
• Supervision and Inspection of all construction activities carried out by contractor on site.
• Maintaining records of site resources, daily progress of work, inspections, construction and workshop drawings, method statements and ITPs (Inspector Testing Plans). Making special notes and document the contract activities that may lead to claims.
• Drafting site instructions for any required variations from, or additions to, the contract documents.
• Report questionable methods of operations by the contractor to the Engineer.
QUALIFICATION:
• B.Sc in civil engineering.
• Holds a Engineer degree from Saudi Council of Engineers.
KNOWLEDGE/EXPERIENCE:
• Minimum 2 years in the supervision and implementation on roads and bridges.
• Finalise acceptance criteria of the quality of work.
• Planning and resource allocation.
• Knowledge of inspection test plans and procedures.
• Work experience with consultants for Inspection of total construction activities on site.
• Knowledge of sampling and testing of construction materials.
TECHNICAL SKILLS/ABILITY:
• Skills in conflict management (eg site generated conflicts).
• Use of computer Languages – Microsoft office and Auto Cad.
• Driving license (experience) will be beneficial.
Surveyor
PURPOSE:
The Surveyor is assigned to supervise and check the setting out of the works on the project. He is to report directly to the engineer in charge of the relevant section of work on the project.
PRINCIPAL ACCOUNTABILITIES:
• Perform survey works under the direction and guidance of the Engineer in charge.
• Check Contractor’s establishment of the primary horizontal and vertical control points including reference points and reference ties for re-establishing the points in the field.
• Supervise the Contractors surveying staff.
• Record discrepancies or technical problems to the Engineer in charge.
• Coordinate with the Contractor’s Surveyors on work priorities and schedule.
• With the Contractor perform joint measurements of the completed work for payments purposes, as directed by the QS via the Engineer.
• Check completed work for conformance to the line and grade required by the project plans in coordination with the inspector assigned in the work.
• Perform regular checks of the Contractor setting out to verify proper execution and accuracy.
• Maintain equipment in proper condition and perform frequent calibration checks.
• Review and comment appropriately to RFA’s as received from the contractor, when directed by the Engineer.
• Review and comment appropriately to shop drawings received from the Contractor, when directed by the Engineer.
• Ensure that the works are being constructed to the latest construction and shop drawings.
• Record all measurements and calculations etc neatly and accurately in field books as the work progress.
QUALIFICATIONS:
• B.Sc in civil engineering or B.Sc in surveying engineering.
• Should hold an Engineer registration from Saudi Council of Engineers.
Experience/Knowledge:
• Minimum 2 years in survey works for roads and bridges.
• Comprehensive knowledge of planning and environmental regulations and health and safety.
• Knowledge of surveying technology and CAD programs.
• Experience on procedures and work sequence.
• Experience in information management (how it get inputs and how to produce outputs).
• Good IT and numerical Skills particularly databases.
TECHNICAL SKILLS/ABILITIES:
• Effective Time management skills.
• Good communication skills (verbal and written).
• Team work.
• Priorities management skills.
• Strong analytical skills.
• Creative approach to Problems solving.
• Documentation management.
• Proactive and Self Motivated.
• Customer Focus- engages in building sound relationships with the customer project team.
Traffic & Safety Engineer
PURPOSE:
Set out detailed methodology for traffic surveys and traffic studies scheme; such methodology will be submitted to the client for review and approval before commencing traffic activities.
PRINCIPAL ACCOUNTABILITIES:
• Collect data resulted from previous traffic studies including traffic counts, traffic composition and public transport.
• To conduct classified traffic survey to better define failure causes, if needed.
• To guide traffic survey team I order to collect consistent traffic data required to define ideal solutions for the ease of traffic.
• To determine traffic survey count stations.
• To conduct traffic circulation study.
• To conduct traffic control devices study in order to improve adequacy and functions of signs, signals, road marking etc.
• To verify and assess traffic growth rates of previous studies.
• To estimate the design year traffic based on traffic forecasts for design purposes.
• To identify design year traffic characteristics, composition and loading of traffic for the reference of the design team.
• To conduct parking supply and demand study for selected area when requested by the client.
• To consult and take advise from the client Traffic Engineer to reach to more consistent results and to apply up-to-date solution in solving traffic problems, advise and consult traffic engineers of the world-wide consultant offices for more consistent results
• To keep client updated regarding new traffic control techniques and device etc applied around the entire world.
QUALIFICATIONS:
• B.Sc in civil engineering.
• Holds a Participant Engineer registration from Saudi Council of Engineers.
KNOWLEDGE/EXPERIENCE:
• Minimum 5 years, including 2 years in roads traffic and safety engineering.
TECHNICAL SKILLS/ABILITIES:
• Ability to design traffic and transportation projects including but not limited to CRISP study, bus priority, parking, traffic calming, and accident study.
• Communicate effectively both written and verbally with clients and other stakeholders.
• Use traffic and transportation design software – Use of CAD will be an advantage.
• Should have basic knowledge of MS project.
Electrical Engineer
PURPOSE:
The Electrical Engineer is responsible for the design and supervision of electrical works. You shall design electrical works as per the requirements of both the client and the end user keeping the prevailing standards and specifications in mind. You should have the thorough knowledge of the latest client qualifications. You shall organize and keep all relevant design documents in accordance with the consulting system for the case of reference at all time.
PRINCIPAL ACCOUNTABILITIES:
• To keep all relevant design standards in order which are to be used at all time for all designs.
• Check the Shop Drawings submitted by the Contractor for compliance with contract standards and specifications.
• Liaison with client and other service authorities during design and execution stages.
• Correspondence with client, contractor and other service authorities
• Check and evaluate Material Submittals of electrical terms submitted by the contractor for construction purposes.
• Study and analyze contractor rate analysis for new electrical items (non B.O.Q) and make necessary recommendations to the client accordingly.
• Inspect electrical materials supplied on site.
• Assist and advise the Resident Engineer during their study of claims, variations raised by contractor for extension of time or extra cost regarding delayed electrical works and verify justifications and basis of contractor claims.
• Attend follow up meetings with the Client Electrical Engineer (if applicable).
• To ensure that quality control of contractor’s works is maintained at all time to the satisfaction of the client and the end user.
• Prepare cost estimate for electrical works for proposed work order.
• Advise and guide the contractor technically to solve any problems that may arise during execution of work.
QUALIFICATIONS:
• B.Sc in Electrical Engineering.
• Should hold a professional Engineer registration from Saudi Council of Engineers.
KNOWLEDGE/EXPERIENCE:
• Minimum 9 years experience in street lighting and the extension of networks.
TECHNICAL SKILLS/ABILITIES:
• Good computer skills, e.g. Excel, MS Word etc.
• Knowledge of UK Electrical Standards.
• Demonstrated report writing skills of a high calibre.
• Excellent client relationship skills, demonstrated by referees.
• Excellent communication and team skills Ability to work as part of a team.
• Able to work to deadlines and under pressure.
• Good problem solving skills & creative thinking (innovation).
• Takes accountability for assigned work.
Document Controller
PURPOSE:
Assist with the smooth running of the office by ensuring that all designated tasks are completed on time.
PRINCIPAL ACCOUNTABILITIES:
• Understand the importance of timeliness to internal and external clients. Achieve reliability and credibility in regard to meeting deadlines.
• Ensure that all work is performed in accordance with the QA System.
• Ensure that confidentiality is maintained at all times.
• Assisting the Administration team with secretarial and any other administrative duties.
• Liaison with team members, clients and general staff.
• Any other duties as reasonably required.
• Receiving and proper distribution of incoming correspondences
• Letter formatting for the team.
• Assembling of documents that must be transmitted to other parties (eg client, contractors, subcontractors etc)
• Scan all received and sent documents in PDF to be uploaded in Mouchel Collaborator
• Proper registration of all incoming/outgoing documents.
• Correspondence filing.
• Segregation of letters according to Project names
• Reproduction of documents.
• Printing of tenders, attachments and other administrative requests from Engineers.
QUALIFICATIONS:
• University degree in Business Administration.
KNOWLEDGE/EXPERIENCE:
• Minimum 5 years of experience.
TECHNICAL SKILLS/ABILITIES:
• Proficiency in Ms Applications.
• Professional attitude, good interpersonal skills.
• Articulate and confident phone manner.
• Accuracy.
• Ability to listen, clarify, understand and efficiently follow directions.
• Ability to prioritise tasks and coordinate others to ensure deadlines are achieved.
• Willingness to learn from others and improve.
• Enthusiastic attitude and responsiveness to direction from Administration Manager.
• Punctual, neat and tidy.
http://www.mouchel.com
Email: munadel.ibrahim@mouchel.
No comments:
Post a Comment
Please give your feedback or Job Request here