One of the Largest Construction Company in the private sector, in the Sultanate of Oman, requires the following personnel for their Oil & Gas Unit.
This is a free recruitment and there is no service charge.
Kindly send your CV urgently for shortlisting.
Final Interview on 12th May at our office in Mumbai & 14th May at Chennai for below vacancies.
Sr Supervisor - Mechanical
This is a free recruitment and there is no service charge.
Kindly send your CV urgently for shortlisting.
Final Interview on 12th May at our office in Mumbai & 14th May at Chennai for below vacancies.
Sr Supervisor - Mechanical
- Diploma in Mechanical Engineering
- Minimum experience of 10 years for Supervisors in the respective field. Candidate with valid GCC Driving license preferred.
- Sr Civil Supervisor
- Diploma in Civil Engineering
- Minimum experience of 10 years for Supervisors in the respective field.
- Candidate with valid GCC Driving license preferred.
- Sr. Engineer - Civil
- Degree / Diploma in Civil Engineering
- Minimum 10 years experience for Degree & 12 years experience for Diploma respectively in Oil & Gas pipeline excavation, plot development, road construction, building works and Oil & Gas Rig location construction.
- Land Surveyor
- Diploma in Civil Engineering
- Minimum 5 years experience in surveying, usage of Total Station, GPS, preparation of survey reports for clients etc.
- Lab Technician / Jr Engineer (Civil)
- Diploma in Civil Engineering
- Minimum 5 years experience in soil / concrete testing laboratories.
- Electrical Foreman / Electrical Supervisor
- Diploma in Electrical Engineering
- Minimum experience of 7 years for Supervisors and 5 years for Foreman in the respective field. Candidate with valid GCC Driving license preferred.
- Civil Supervisor / Civil Foreman
- Diploma in Civil Engineering
- Minimum experience of 7 years for Supervisors and 5 years for Foreman in the respective field.
- Candidate with valid GCC Driving license preferred.
- Mechanical Foreman / Mechanical Supervisor
- Diploma in Mechanical Engineering
- Minimum experience of 7 years for Supervisors and 5 years for Foreman in the respective field. Candidate with valid GCC Driving license preferred.
- Relay Testing & Commissioning Engineer
- Degree/Diploma in Electrical Engineering
- Minimum 5 years experience for Degree & 8 Years experience for Diploma in 132kV power supply system.
- Project Engineer - Mechanical
- Degree/ Diploma in Mechanical Engineering
- Minimum 5 years experience for Degree & 8 years experience for Diploma respectively in oil & gas field especially in construction of pipelines, piping tanks and rotary equipments.
- Electrical & Instrumentation Engineer
- Degree / Diploma in Electrical / Inst Engineering
- Minimum 5 years experience for Degree & 8 years experience for Diploma respectively in Oil & Gas field Instrumentation / Electrical installation.
- Civil Engineer
- Degree / Diploma in Civil Engineering
- Minimum 5 years experience for Degree & 8 years experience for Diploma respectively in Oil & Gas pipeline excavation, plot development, road construction, building works and Oil & Gas Rig location construction.
- Interview 10th at Cochin, 11th May at Mumbai for below Vacancies
- Equipment Supervisor
- Allocation of suitable mechanics to undertake the repairs and also brief them on expected time of completion of repair.
Study the inspector report and explain to the Mechanics before proceeding with the repairs.
Monitor repairs closely and ensure special attention to critical and priority cases.
Assesses the spare parts requirement and prepare requisition for submission to the spare parts stores taking into account the possibility for fabrication for long delivery.
Close supervision of actual repairs and guiding the mechanics to ensure quality of repairs.
Bring to the notice of Equipment Manager cases of misuse/neglect.
On completion of all repairs, ensure proper checks are carried out before and after work done. A thorough functional test is to be carried out before presenting to the Inspector for inspection.
In case of performing the duties of Owner, duties of Transport Manager is also applicable.
- Degree / Diploma in Engineering
Minimum 3 yrs experience for Degree and 5 yrs experience for Diploma.
Allocation of suitable mechanics to undertake the repairs and also brief them on expected time of completion of repair.
Study the inspector report and explain to the Mechanics before proceeding with the repairs.
Monitor repairs closely and ensure special attention to critical and priority cases.
Assesses the spare parts requirement and prepare requisition for submission to the spare parts stores taking into account the possibility for fabrication for long delivery.
Close supervision of actual repairs and guiding the mechanics to ensure quality of repairs.
Bring to the notice of Equipment Manager cases of misuse/neglect.
On completion of all repairs, ensure proper checks are carried out before and after work done. A thorough functional test is to be carried out before presenting to the Inspector for inspection.
In case of performing the duties of Owner, duties of Transport Manager is also applicable.
- Equipment Manager
- Ensure safety of mechanics and environment
Motivate and train the team of technicians
Follow Quality procedures and proper documentation
Monitor repairs closely and ensure special attention to critical and priority cases
Organize, monitor and execute routine and preventive maintenance of vehicles / equipment, their monthly inspection and attending to the points and I documentation
Ensure that defective Vehicle/ equipment are repaired ( promptly if within the capability, as per priority of the 1 project
Initiation of requisitions for spares for repah, routine / preventive maintenance and stock for Vehicle Equipment.
Training of personnel including national technicians during induction
- Sr Equipment Engineer
- Responsible to ensure that fleet are repaired in time as per the priority laid down. Follow up on services, preventive maintenance schedules and Repair maintenance activities of the Plant I Equipment.
Allocation of suitable mechanics to undertake the repairs and also brief them on expected time of completion of repair.
Conduct Tool box talks to technicians on Safety and HSE policies and their compliance. Study the Inspectors report and explain to the Mechanics before proceeding with the repairs.
Monitor repairs closely and ensure special attention to critical and priority cases.
Close supervision of actual repairs and guiding the mechanics to ensure quality of repairs. Find Cost saving measures and adopt best practices at wherever applicable.
Bring to the notice of Equipment Manager cases of misuse/neglect.
On completion of all repairs, ensure proper checks are carried out before and after work done. A thorough functional test is to be carried out before presenting to the Inspector for inspection.
Ensure that spare part requirement plan is submitted well in time so as to avoid delays/ extra costs in procurement
- Degree / Diploma in Engineering
Minimum 5 yrs Experience
Should be young and dynamic should be able to work in line the Workshop /site/ project demands
Positive attitude and target oriented person
Responsible to ensure that fleet are repaired in time as per the priority laid down. Follow up on services, preventive maintenance schedules and Repair maintenance activities of the Plant I Equipment.
Allocation of suitable mechanics to undertake the repairs and also brief them on expected time of completion of repair.
Conduct Tool box talks to technicians on Safety and HSE policies and their compliance. Study the Inspectors report and explain to the Mechanics before proceeding with the repairs.
Monitor repairs closely and ensure special attention to critical and priority cases.
Close supervision of actual repairs and guiding the mechanics to ensure quality of repairs. Find Cost saving measures and adopt best practices at wherever applicable.
Bring to the notice of Equipment Manager cases of misuse/neglect.
On completion of all repairs, ensure proper checks are carried out before and after work done. A thorough functional test is to be carried out before presenting to the Inspector for inspection.
Ensure that spare part requirement plan is submitted well in time so as to avoid delays/ extra costs in procurement
- Equipment Engineer
- Responsible to ensure that fleet are repaired in time as per the priority laid down. Follow up on services, preventive maintenance schedules and Repair maintenance activities of the Plant I Equipment.
Allocation of suitable mechanics to undertake the repairs and also brief them on expected time of completion of repair.
Conduct Tool box talks to technicians on Safety and HSE policies and their compliance. Study the Inspectors report and explain to the Mechanics before proceeding with the repairs.
Monitor repairs closely and ensure special attention to critical and priority cases.
Close supervision of actual repairs and guiding the mechanics to ensure quality of repairs. Find Cost saving measures and adopt best practices at wherever applicable.
Bring to the notice of Equipment Manager cases of misuse/neglect.
On completion of all repairs, ensure proper checks are carried out before and after work done. A thorough functional test is to be carried out before presenting to the Inspector for inspection.
Ensure that spare part requirement plan is submitted well in time so as to avoid delays/ extra costs in procurement
- Degree / Diploma in Engineering
Minimum 5 yrs Experience
Should be young and dynamic should be able to work in line the Workshop /site/ project demands
Positive attitude and target oriented person
Responsible to ensure that fleet are repaired in time as per the priority laid down. Follow up on services, preventive maintenance schedules and Repair maintenance activities of the Plant I Equipment.
Allocation of suitable mechanics to undertake the repairs and also brief them on expected time of completion of repair.
Conduct Tool box talks to technicians on Safety and HSE policies and their compliance. Study the Inspectors report and explain to the Mechanics before proceeding with the repairs.
Monitor repairs closely and ensure special attention to critical and priority cases.
Close supervision of actual repairs and guiding the mechanics to ensure quality of repairs. Find Cost saving measures and adopt best practices at wherever applicable.
Bring to the notice of Equipment Manager cases of misuse/neglect.
On completion of all repairs, ensure proper checks are carried out before and after work done. A thorough functional test is to be carried out before presenting to the Inspector for inspection.
Ensure that spare part requirement plan is submitted well in time so as to avoid delays/ extra costs in procurement
Recruiter Name:Munaf
Email Address:
Telephone:9699322225
Post a Comment